multilink bundle-name authenticated 意思是多链路捆绑名称认证。链路捆绑技术,目前已被广泛地应用在一些网络连接中。通过将多条链路捆绑在一起提高了网络系统的带宽,并且为网络系统提供了高可用性,负载分担等功能。1999年提出的IEEE Standard 802.3ad为链路聚合技术制定了标准,提出了链路聚合的目标。链路聚合...
看来cisco路由器与对方路由器建立mlppp时会以对方的hostname作为bundlename之后将interface加到这个bundle里时都要检查这个interface所联对方设备的hostname与原来的bundlename是否一致如果不一致就加不进来 multilinkppp的故障 一台3660路由器与中心的7513之间,将4个E1口绑定成MLPPP线路使用。 用户突然发现其中一个E1线路...
xian-mp# show ppp multilink Multilink1, bundle name is mp 0 lost fragments, 1421 reordered, 0 unassigned, sequence 0x1E4A/0x838 rcvd/set 0 discarded, 0 lost received, 1/255 load Member links: 2 active, 0 inactive (max not set, min not set) Serial0/0:0 ...
. . . interface Dialer0 ip address 10.1.1.4 255.255.255.0 encapsulation ppp dialer remote-name R-name dialer string 23456 dialer pool 1 dialer-group 1 ppp chap hostname group 1 ppp multilink endpoint ip 10.1.1.4 . . . Related Commands Command Description multilink bundle-name Selects ...
bobslake-nas-01(config)#multilink bundle-name both Der MP-Paketname wird mit einer der folgenden Optionen erstellt: Der authentifizierte Name und der Endpunkt-Diskriminator (z. B. fred/myrouter). Der authentifizierte Name, wenn kein Endpunkt-Diskriminator angegeben wird. Der Endpunkt...
sh ppp multilink doesn't appear to show anything too serious: RTR#show ppp multilink Multilink123, bundle name is host1056 Endpoint discriminator is host1056 Bundle up for 21:46:17, total bandwidth 3072, load 12/255 Receive buffer limit 24000 bytes,
It seems to me that the multilink should have an address (as you do) and that the physical links in the bundle should have no ip address. And I am not sure that this would contribute to the symptoms that you describe. HTH Rick HTHRick 0 Helpful Reply michelle.whitehead Level 1 ...
看来cisco路由器与对方路由器建立MLPPP时会以对方的hostname作为bundle name,之后将interface加到这个bundle里时都要检查这个interface所联对方设备的hostname与原来的bundle name是否一致,如果不一致就加不进来。 所以如果MLPPP建立好后,如果修改了对方的hostname,那么如果某个interface down后再up,再要加到bundle时就会不...
Make pppd use the unit and not the interface name to get the bundle. pppd was looking for the default interface name (pppX) in the database to retreive the bundle id on which a new link should attach, and fails if theifnameoption is used....
In either case, the PPP Multilink Protocol (MP, which also goes by several aliases such as MLPPP and MLP) can be used to aggregate the bandwidth of these physical links to create a single, high-speed bundle. I describe how this is done in the operational topic on MP. ...