l2-multicast forwarding-mode命令用来配置VLAN内组播数据转发模式。 undo l2-multicast forwarding-mode命令用来恢复缺省情况。 缺省情况下,VLAN内组播数据按IP地址模式转发。 命令格式 l2-multicast forwarding-mode { ip | mac } undo l2-multicast forwarding-mode mac 参数说明 参数参数说明取值 ip 指定组播数据按...
l2-multicast forwarding-mode 命令功能 l2-multicast forwarding-mode命令用来配置VLAN内组播数据转发模式。 undo l2-multicast forwarding-mode命令用来恢复缺省情况。 缺省情况下,VLAN内组播数据按IP地址模式转发。 命令格式 l2-multicast forwarding-mode{ip|mac} ...
[SW1]display l2-multicast forwarding-table vlan 20 VLAN ID : 20, Forwarding Mode : IP --- (Source, Group) Interface Out-Vlan --- Router-port GigabitEthernet0/0/1 20 对应了路由接口 (*, 225.1.1.1) GigabitEthernet0/0/1 20 这两个对应了组接口 GigabitEthernet0/0/2 20 ---...
Enables multicast enhanced fabric forwarding. Configuring Host VLANs PIM is enabled automatically and operates in passive mode on a server facing SVI/BDI. In order to enable IGMPv3, the following configuration must be done on the server facing SVI/BDI. ...
The parameters that affect Multicast forwarding are: Controller platform. Global AP multicast mode configuration at the controller. Mode of the AP - Local, FlexConnect central switching. For Local switching, it does not send/receive the packet to/from the controller, so it does not matter which...
2. Configure the maximum number of entries in the multicast forwarding table. multicast forwarding-table route-limit limit Optional. The default upper limit depends on the system working mode. For more information, see Fundamentals Configuration Guide. 3. Configure the maximum number of downstream...
For a large scale PIM-DM (protocol independent multicast-dense mode) network with multicast routing protocol employed, many leaf networks may exist (a leaf network here refers to an end node of a multicast forwarding tree, it is a subnet that contains multicast clients only). It is a heavy...
-MulticastForwardingSpecifies a value for multicast forwarding. The cmdlet modifies the value for this setting. The acceptable values for this parameter are: Enabled. The computer can forward multicast packets. Disabled. The computer cannot forward multicast packets. ...
If these messages are stopped, ADMR “prunes” the specific branches of the forwarding tree. Multicast data packets are forwarded from the sender to the multicast receivers using MAC layer multicast transmissions along the path of shortest delay. In a network with highly mobile nodes the cost of...
As an IGMP multicast router, the IGMP router-mode interface elects an IGMP query router for the subnet. Maintains the IP multicast forwarding table. The IP multicast forwarding table for the TCP/IP protocol is updated based on IGMP group membership messages and multicast datagrams received on ...