i2c驱动无法正常工作 大家好,我正在尝试与PIC24FJ128GB606接口128x64I2C的OLED显示器。我使用MPLABX4.15和X16 3.15编译器。并且我从MCC产生了I2C驱动程序。现在的问题是 zzzzlala2018-09-13 15:24:43 MCCI2C和24FC1026顺序读取和页面写入 大家好,使用MC24FC1026 EEPROM来存储数据,需要能够使用序列读取和Page写的...
mplabxide在编译时,发现没有starter kits,而且在编译时,还无法启动调试器,希望大神们能帮忙看一下。 xiaoxiannv1232019-05-22 20:18:59 MPLABXIDE和MPLABXIPE自动安装是正确的吗? 您好,我想MPLABXIPE是用MPLABXIDE自动安装的。这是正确的吗?是否有任何许可证FabLabbXIDE或它是开源的,可以免费安装和使用吗?感谢...
我正在尝试通过I2C总线将两个VL6180 TOF传感器连接到Arduino板。我可以分别读取来自两个传感器的数据,但如果两个传感器都连接到I2C总线,则无法读取。当两个传感器连接时,我可以从单个传感器读取值。当我尝试使用I2C扫描器查找两个传感器的地址时,我只能找到一个传感器的地址,这是默认值0x29。我可以单独读取传感器的地址...
Device and embedded software libraries can be configured with MCC, a GUI-based configurator integrated into MPLAB X IDE, which provides a unified interface to all the features of the embedded software framework Optimized peripheral libraries to simplify device setup and peripheral usage Modular software...
• MPLAB ® X IDE v2.35/v3.00 or later • XC8 compiler v 1.34 or later • XC16 compiler v 1.24 or later 3 Documentation Support The MPLAB ® Code Configurator User’s Guide (DS40001725) may be found on the MPLAB ® Code Configurator page on the Microchip web site. ...
I2C™,UART,USART,字符串操作和 数学函数库 • 用户能对数据和代码的存储空间分配进行完全控制 1.2 调用编译器 《MPLAB® C18 C 编译器入门》(DS51295C_CN)描述了如何在 MPLAB IDE 中使用 C18 编译器.也可以通过命令行调用编译器,命令行用法如下: mcc18 [options] file [options] 可以指定一个源文件和...
4. Open the MPLAB Code Configurator page: https://www.microchip.com/mcc 5. Scroll to the bottom of the page and select the Current Downloads tabs 6. Download the Turnkey Touch Library (TurnkeyTouch-1.0.0.jar)7. In the MPLAB® X IDE click on Tools → Options 8. Click on Plugins...
给出一个可以告诉I2C库的链接。并解释一下让I2C处理新的IDE和新的XC是多么容易。微型芯片让我很伤心。
Create an MPLAB X IDE Harmony v3 project for a PIC32MZ EF microcontroller from scratch. Use the MCC to configure and generate Harmony v3 PLIBS code for TMR1, I²C, UART, DMA, and GPIO peripherals. Use the Harmony v3 PLIB Application Programming Interfaces (APIs) to implement the applica...
#include "mcc_generated_files/mcc.h" voidmain(void) { // initialize the device SYSTEM_Initialize(); while(1) { adc_result_tdutyValue=ADCC_GetSingleConversion(pot);//load the potentiometer value in a 16 bit variable if(dutyValue<90)//if the potentiometer does not give 0 value ...