Activity monitor keeps flashing on MacBook with macOS Sonoma. Using MacBook Pro, Sonoma 14.4. Activity monitor flashes on screen when I try to open, but doesn't stay open. Reinstalled OS, ran First Aid on drives, and reset everything Apple recommended. Issue persists. [Re-Titled By Moderat...
Off (unlit) System has not finished startup or Drive is ready to be removed Flashes green, amber, and off Drive failure is predicted Flashes amber four times per second Drive failed Solid green Drive is onlineThe right side of the drive (3) is labeled with the drive's capacity and other...
Color LCD Monitor Software Version 4.1 Important Please read this Instruction Manual, the Installation Manual and the Setup Manual carefully to familiarize yourself with safe and effective usage.• For the latest product information including the User’s Manual, refer to our web site:http://www....
Click on Start and type: Lock Screen Settings. In Lock screen - click on 'Advanced slideshow settings'. In Advanced slideshow settings - there is a setting: 'When my PC is inactive, show lock screen instead of turning off the screen' that was set to ON, change it to OFF. https://su...
Run MM, move to secondary monitor and close MM on the secondary (my left) monitor. Start MM Splash screen shows on main screen which is expected MM icon briefly flashes on the main screen When the window actually opens the MM icon moves to the secondary screen *Note: in my case ...
Turning on the main power • Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode. • To disable the logo screen from displaying when turning the power ON, set LOGO SCREEN to OFF on the SETUP menu. (See page 25.) • If you change the remote ...
Main power switch Turns the main power on or off. 12. Power connector Connects the power cord. 13. Input signal connectors Left: DVI-D connector / Center: DisplayPort connector / Right: Mini DisplayPort connector 14. USB port (Up) Connects the USB cable to use the software that needs USB...
– SCROLL LOCK is not turned on. 4. Press and release the Reset button near the power LED once. The Status LED will turn off for 5–7 seconds, then flash rapidly orange and green. Press the Reset button a second time while the Status LED flashes to temporarily reset the user name ...
While it is still visible, click and drag the bar at the top of the alert to move it to the desired location on your second monitor.4. Click "OK" however many times to close out the open dialogs.From now on, the alert should pop up wherever you moved it to....
Power Switch The power switch is located to the right of the power supply and above the relays (see Figure 1). The power switch turns the incoming AC power source on and off at the Beacon 110. When the switch is up, the power switch is on. CAUTION: The DC power input has no on/...