One end of the straight-through cable has been connected to the RS485_IN port on the T/H sensor, and the other end has been connected to the COM1/AIDI_4 port on the ECC800-Pro. Procedure Set the T/H sensor device address. Set the device address for a T/H sensor by operating th...
RS485 serial information, http://www.lammertbies.nl/comm/info/RS-485.html; printed from Internet on Jul. 27, 2011; 3 pages. Primary Examiner: HARTMAN JR, RONALD D Attorney, Agent or Firm: Leviton Manufacturing Co., Inc.; In-House Account Parent Case Data: CROSS-REFERENCE TO RELATED APP...
(Comm Data Rate) A104 - (Comm Node Addr) A107 - (Comm Format) Value 5 ("RS485 [MDI] Port") 5 ("RS485 [MDI] Port") 4 ("19.2K") 1-247 (must be unique) 0 ("RTU 8-N-1") Note that the RS-485 network is fixed at 19.2K baud, 8 data bits, no parity, and 1 stop ...
1 4.1 RS485 Transmission Mode The PRO2000v4_RED module uses a half-duplex, multidrop, serial communication line RS485. The card communicates with the Masters via its RS485 interface and the transmission media consists in a shielded twisted pair cable. Transmission speed from 9.6 kbit/s to 1.5...
You may also specify Powermonitor 3000 units with optional communication ports including the following: • Serial RS-232 • Remote I/O • DeviceNet • EtherNet/IP • ControlNet A power monitor may be integrated into a programmable controller or computer-based control and monitoring system...
RS485 tx enable : active low ,HTTP Port Number : 80 ,SMTP Port Number : 25 ,MTU Size: 1400 ,Alternate MAC: disabled ,Ethernet connection type: auto-negotiate , *** E-mail ,Mail server: 0.0.0.0 ,Unit : ,Domain : ,Recipient 1: ,Recipient 2: , ,- Trigger 1 ,Serial trigger input...