A fuel additive composition for improving the delivery of friction modifier to the lubricant oil of an internal combustion engine comprising (a) a friction modifying amount of a reaction product of at least one natural or synthetic oil and at least one alkanolamine; and, (b) at least one fuel...
starting from a 180-nm node device, but the life of the KrF excimer lithography was prolonged to mass production of the 130-nm node device; and thus, a full-fledged application of the ArF lithography started from the 90-nm node. Further, mass production of the 65-nm node device is now...
This procedure ensured the elimination of any trapped air pockets that might have been introduced during the PAV aging, thereby ensuring the binder’s homogeneity and enhancing its consistency for subsequent testing. Upon concluding the aging procedures, the bitumen specimens subjected to short-term ...
The same procedure was repeated on the second day. On the third day, the 4 trials were conducted using a 2 cm wide bar. Three hours later, the animal was then tested in the same manner on a 1 cm bar. For each trial period, the time to reach the platform, number of times the ...
The functionalization process for the laponite was adapted from a procedure reported in a previous study [8]. A known amount of laponite (2 g) was dispersed in 15 mL of toluene and mixed under a N2 flow for 10 min. Then, to the mixture maintained under stirring, 4 mL of (3-(2-amin...