mode{lacp-static|lacp-dynamic|manual[load-balance]} undo mode 参数说明 参数参数说明取值 lacp-static指定Eth-Trunk工作模式为静态LACP模式。- lacp-dynamic指定Eth-Trunk工作模式为动态LACP模式。- manual[load-balance]指定Eth-Trunk工作模式为手工负载分担模式。- ...
mode lacp-static原理 1. LACP(Link Aggregation Control Protocol)的基本概念 LACP(Link Aggregation Control Protocol,链路聚合控制协议)是一种用于在以太网交换机之间协商链路聚合参数的协议。通过LACP,交换机可以动态地协商哪些物理端口应该被捆绑在一起,形成一个逻辑上的链路聚合组(LAG),从而实现更高的带宽和更好的...
mode lacp-static Function The mode command configures the working mode of an Eth-Trunk. Format mode lacp-static Parameters None. Views Eth-Trunk interface view Default Level 2: Configuration level Usage Guidelines Usage Scenarios Currently, the device supports Eth-Trunks to work in the follow...
尝试修改模式时提示报错,需要先将接口移出 [LSW1-Eth-Trunk1]mode lacp-static Error: Error in changing trunk working mode. There is(are) port(s) in the trunk [LSW1-Eth-Trunk1]undo trunkport GigabitEthernet 0/0/2 0/0/3 [LSW1-Eth-Trunk1]mode lacp-static ...
A.mode lacp-staticB.max active-linknumber link-numberC.lacp priority priorityD.least active-linknumber link-number相关知识点: 试题来源: 解析 B.max active-linknumber link-number;C.lacp priority priority;D.least active-linknumber link-number 反馈...
51CTO博客已为您找到关于mode lacp-static的相关内容,包含IT学习相关文档代码介绍、相关教程视频课程,以及mode lacp-static问答内容。更多mode lacp-static相关解答可以来51CTO博客参与分享和学习,帮助广大IT技术人实现成长和进步。
要实现静态LACP链路聚合,如下哪个命令是eth-trunk接口下必须配置的命令? ()A.Lacp priority 100B.Mode lacp-staticC.Po
配置Trunk30和静态LACP模式,并将Trunk30端口的VLAN配置为77。 <SwitchA>system-view [~SwitchA]vlan 77 [*SwitchA]interface Eth-Trunk 30 [*SwitchA-Eth-Trunk30]port link-type trunk [*SwitchA-Eth-Trunk30]port trunk allow-pass vlan 77 [*SwitchA-Eth-Trunk30]mode lacp-static ...
parm: lacp_rate:LACPDU tx rate to request from802.3ad partner;0forslow,1forfast (charp) parm: ad_select:802.3ad aggregation selection logic;0forstable (default),1forbandwidth,2forcount (charp) parm: min_links:Minimum number of available links before turning on carrier (int) ...