int modbus_set_slave(modbus_t *ctx, int slave) 功能:设置从机ID 参数: ctx :Modbus实例 slave:从机ID 返回值:成功:0 失败:-1 int modbus_connect(modbus_t *ctx) 功能:和从机(slave)建立连接 参数: ctx:Modbus实例 返回值:成功:0 失败:-1 void modbus_free(modbus_t *ctx) 功能:释放Modbus实例 ...
port:端口号 返回值:成功:Modbus实例 失败:NULL int modbus_set_slave(modbus_t *ctx, int slave) 功能:设置从机ID 参数: ctx :Modbus实例 slave:从机ID 返回值:成功:0 失败:-1 int modbus_connect(modbus_t *ctx) 功能:和从机(slave)建立连接 参数: ctx:Modbus实例 返回值:成功:0 失败:-1 void mo...
Modbus Slave 使用多文档界面。这意味着可以打开多个窗口。每一个具有不同的数据内容,用于同时模拟不同的从机设备。这张照片显示了两个打开的窗口。一个模拟来自地址 0 (40001) 从机 id 1 的 10 个保持寄存器,另一个模拟来自地址 0 (40001) 从机 id 2 的 10 个保持寄存器。
MODBUS_API int modbus_report_slave_id(modbus_t * ctx, intmax_dest, uint8_t * dest): 该函数对应于功能码17(0x11)报告从站ID。参数max_dest代表最大的存储空间,参数dest用于存储返回数据。返回数据可以包括如下内容:从站ID状态值(0x00=OFF状态,0xFF=ON状态)以及其他附加信息,具体的各参数意义由开发者...
MODBUS_API int modbus_set_slave(modbus t * ctx,int slave) 此函数的功能是设置从站地址,但是由于传输方式不同而意义稍有不同。 RTU模式 : 如果libmodbus应用于 主站设备端,则相当于定义 远端设备ID ;如果libmodbus应用于从站设备端 ,则相当于定义 自身设备 ID ;在 RTU 模式下参数 slave 取值范围为 0~...
The set slave function returns 0 (success) and then I call modbus_read_input_bits() with appropriate values. But the poll message is not going out rather I am getting error as "Error: Connection timed out: Select". Even though the poll message for read inputs returned with an error I...
modbus_set_slave() disallows Slave IDs above 247. A particular modbus device that I am using defaults to a slave ID above 247 (specifically, 254) and does broadcast on IDs 255 and 0. This means that I cannot interact with this device directly....
成功返回0, 否则返回-1ret = modbus_set_slave(mb, slave);//连接Modbus主机,成功返回0, 否则返回-1ret = modbus_connect(mb);//设置响应超时时间1s,200msret = modbus_set_response_timeout(mb, 1, 200000);//读取寄存器数据,起始地址2, 数量5, 保存到table数组中//成功返回5, 否则返回-1uint16_t...
MODBUS_API int modbus_set_slave(modbus t * ctx,int slave) 此函数的功能是设置从站地址,但是由于传输方式不同而意义稍有不同。 RTU模式 : 如果libmodbus应用于 主站设备端,则相当于定义 远端设备ID ;如果libmodbus应用于从站设备端 ,则相当于定义 自身设备 ID ;在 RTU 模式下参数 slave 取值范围为 0~...
intmodbus_set_slave(modbus_t*ctx,intslave); DESCRIPTION Themodbus_set_slave()function shall set the slave number in the libmodbus context. The behavior depends of network and the role of the device:RTUDefine the slave ID of the remote device to talk in master mode or set the internal sla...