候静波教授:MLD MAX这个名字很巧妙,MLD代表着最小管腔面积,MAX代表最大化,我们介入医生竭尽全力追求的就是术后最大的管腔面积。其6个字母则代表了术前、术后应用OCT评价的关键步骤,其对临床治疗的指导意义也经过Light Lab研究的验证:遵守了MLD MAX的标准...
mld max-response-time 命令功能 mld max-response-time命令用来在接口上配置MLD普遍组查询报文的最大响应时间。 undo mld max-response-time命令用来恢复MLD普遍组查询报文的最大响应时间为缺省值。 缺省情况下,MLD普遍组查询报文的最大响应时间为10秒。
在MLD MAX标准路径的影响下,对OCT的理解和PCI手术观念现已发生了巨大转变。 钱杰教授:MLD MAX标准路径是对OCT临床应用经验的总结和提炼,但“讲道容易行道难”,仍需要加强相关教育培训课程的开设以确保年轻术者正确理解OCT的临床应用策略,...
<HUAWEI> system-view [HUAWEI] multicast ipv6 routing-enable [HUAWEI] interface vlanif 100 [HUAWEI-Vlanif100] ipv6 enable [HUAWEI-Vlanif100] mld max-response-time 8 # Set the maximum response time for MLD General Query messages to 8 seconds on GE0/0/1. <HUAWEI> system-view [HUAWEI] ...
max-response-time time 缺省情况下,MLD普遍组查询报文的最大响应时间为10秒。 (10) 配置MLD其它查询器的存在时间。 other-querier-present-timeout time 缺省情况下,MLD其它查询器的存在时间=MLD普遍组查询报文的发送间隔×MLD查询器的健壮系数+MLD普遍组查询的最大响应时间÷2。 4. 在接口上配置MLD查询和响应 ...
max-response-time time 缺省情况下,MLD普遍组查询报文的最大响应时间为10秒 配置MLD其它查询器的存在时间 other-querier-present-timeout time 缺省情况下,MLD其它查询器的存在时间=MLD普遍组查询报文的发送间隔×MLD查询器的健壮系数+MLD普遍组查询的最大响应时间÷2 2. 在接口上配置MLD查询和响应 表1-7 在接...
最大响应时间(Max Response Code):成员主机在收到IGMP查询器发送的普遍组查询报文后,需要在最大响应时间内做出回应。 校验和(Checksum) 组播组地址(Group Address):在普遍组查询报文中,该字段设为0;在特定组查询报文和特定源组查询报文中,该字段为要查询的组播组地址。
Type(8bit) +Max Response Time(8bit) + Checksum(16bit) + Group Address(32bit) Type:报文类型 0x11:查询报文,普遍组查询报文或特定组查询报文 0x12:IGMPv1成员报告报文 0x16:IGMPv2成员报告报文 0x17:成员离开报文 Max Response Time:最大响应时间 ...
max 4096 mc last member count 2 mc init query count 2 mc router 1 mc snooping 1 mc last member timer 1.00 mc membership timer 260.00 mc querier timer 255.00 mc query interval 125.00 mc response interval 10.00 mc init query interval 31.25 mc querier 0 mc query ifaddr 0 flags swp1 (1)...
The number of unique multicast groups supported in the MDB is 4096 by default. To increase the maximum number of multicast groups in the MDB, edit the/etc/network/interfacesfile to add abridge-hashmaxvalue to the bridge stanza: auto br_default iface br_default bridge-hashmax 16384 bridge-po...