in table 107-V. Immediately upon the conclusion of step 1, the device shall be transferred to a suitable liquid at the temperature specified in step 2 of the specified test condition. The device shall remain at the high temperature for the time specified in table 107-V. These two steps, ...
MIL-STD-202 Method108 1.5hourson,0.5houroff,still-airrequired ±(3.0%+0.05 ) forJtol <100 forJumper Resistanceto AEC-Q200 Test15 ConditionB,nopre-heatofsamples ±(0.5%+0.05 )forD/Ftol SolderingHeat MIL-STD-202Method210 Lead-freesolder,260±5°C,10±1seconds ±(1.0%+0.05 ) forJtol ...
Test condition B (15g peak) for 202 High Frequency Vibration The specimens are tested while de-energized or operating under the load conditions specified. They are subjected to the vibration amplitude, frequency range, and duration. What Amplitude Should Be Used in MIL-202 High Frequency Vibration...
condition DD DD-1 DD-2 Temperature °C -65 +0, -10 200 +10, -0 See table 107-V See table 107-V Number of cycles 5 15 25 Time Step REPRINTED WITHOUT CHANGE 3 METHOD 107G 28 March 1984 Downloaded from http://www.everyspec.com MIL-STD-202G NOTICE 1 18 July 2003 TABLE 107-IV....
METHOD 107G 28 March 1984 1 of 5 MIL-STD-202G 3.2 Liquid baths. Specimens shall be immersed in a suitable liquid that shall be approved by the qualifying activity (see table 107-IV), at the temperature in step 1 of the specified test condition (see table 107-III) for the time specifi...
-0 See table 107-V See table 107-V Number of cycles 5 15 25 Time Test condition DD DD-1 DD-2 Temperature °C -65 +0, -10 200 +10, -0 See table 107-V See table 107-V Number of cycles 5 15 25 Time Step REPRINTED WITHOUT CHANGE 3 METHOD 107G 28 March 1984 Downloaded from ...