[admin@MikroTik] > /interface ethernet monitor ether1 name: ether1 status: link-ok auto-negotiation: done rate: 1Gbps full-duplex: yes tx-flow-control: no rx-flow-control: no advertising: 10M-half,10M-full,100M-
In case of a reboot, any of the two ports can be running, it depends on which port will successfully establish the link first. Whensfpmode is selected, the interface will only work through SFP/SFP+ cage. Whencoppermode is selected, the interface will only work through RJ45 Ethernet port....