建立 MikroTik RouterOS 描述 注意 记录在 MikroTik 路由器 描述 添加软件包 描述 终端控制台导航 描述 ...
Default command prompt consists of user name, system identity, and current command path /> For example, change the current path from the root to the interface then go back to the root [admin@MikroTik] > interface [enter] [admin@MikroTik] /interface> / [enter] ...
To display interface members in each interface list, execute: [admin@MikroTik] > /interface list member print- sample output -Columns: LIST, INTERFACE # LIST INTERFACE ;;; defconf 0 LAN bridge ;;; defconf 1 WAN ether1 To list the interface that are the members of the bridge, execute: ...
[admin@device] /tool mac-server set allowed-interface-list=none [admin@device] /tool mac-server print allowed-interface-list: none You can check active MAC Telnet sessions (that the device accepted) with the command: [admin@device] > tool mac-server sessions print ...
MikroTik RouterOS API文档原文网络链接:翻译者:本文档介绍了如何使用MikroTik RouterOS API配置RouterOS。 应用程序编程接口API 允许您客制化自己的WinBox计程仪程序。 本文档可帮助您为
To enable access via a PPP interface instead of a LTE Interface, change direct IP mode with /port firmware set ignore-directip-modem=yes command and a reboot. Note that using PPP emulation mode you may not get the same throughput speeds as using the native lte interface.LTE Client Sub-...
MikroTik RouterOS API 操作手册
# ADDRESS NETWORK INTERFACE 0 192.168.1.1/24 192.168.1.0 bridge01 1 D 119.128.4.27/32 119.128.4.1 ChinaNet 1.2、命令行的结束 ";"与回车标志命令行结束并执行,当命令包含在"{}" or "[]" or "()"中可以不需要结束符。 ";"使用演示:
command [?] Gives help on the command and list of arguments [Tab] Completes the command/word. If the input is ambiguous, a second [Tab] gives possible options / Move up to base level .. Move up one level /command Use command at the base level ...
Winbox is a small utility that allows administration of Mikrotik RouterOS using a fast and simple GUI. It is a native Win32 binary, but can be run on Linux and Mac OSX using Wine.All Winbox interface functions are as close as possible to Console functions, that is why there are no ...