to get yourself accustomed to the possibilities:https://mt.lv/help. In case an IP connection is not available, the Winbox tool (https://mt.lv/winbox) can be used to connect to the MAC address of the device from the LAN side (all access is blocked from the Internet port by default)...
In case the IP connection is not available, the Winbox tool (https://mt.lv/winbox) can be used to connect to the MAC address of the device.The device is equipped with an RJ45 serial port, set by default to 115200 bit/s, 8 data bits, 1 stop bit, no parity. Standard RJ45 to COM...
Rule can match MAC address of remote access point, it's signal strength and many other parameters. Operation: * connect-list rules are always checked sequentially, starting from the first. * disabled rules are always ignored. * Only the first matching rule is applied. * If SSID or exact ...
This error means that the library cannot connect to your router, it may mean router turned off (then need turn on), or the API service not enabled.Go to Mikrotik Router OS -> IP -> Services and enable api service.Or via command line:/ip service enable api ...
For [[PPPoE]] it is the MAC address (written in CAPITAL letters) a client must connect from. For ISDN it is the caller's number (that may or may not be provided by the operator) the client may dial-in from }} {{Mr-arg-table |arg=comment |type=string |default= |desc=Short ...
[connect-to <address>] Configure PPTP client add [name <interface name>] [up] [down] [mtu <mtu>] [mru <mru>] [pap no|yes] [chap no|yes] [ms-chap no|yes] [ms-chapv2 no|yes] [encryption none|optional|required|stateless] [idle-timeout hh:mm:ss] [user <name>] [conne...
Additionally, due to my specific situation where I need to connect to Mikrotik VPN server via two separate ISPs, I added : /certificate add name="vpnServer2" common-name="my.Other.dns.name" subject-alt-name="DNS:my.Other.dns.name" days-valid=3650 /certificate sign "vpnServer2" ca="...
This error means that the library cannot connect to your router, it may mean router turned off (then need turn on), or the API service not enabled.Go to Mikrotik Router OS -> IP -> Services and enable api service.Or via command line:/ip service enable api ...
❯ mktxp print -en MKT-GT -cc Connecting to router MKT-GT@10.**.*.** 2021-01-24 12:04:29 Connection to router MKT-GT@10.**.*.** has been established | dhcp_name | dhcp_address | mac_address | rx_signal | interface | ssid | tx_rate | rx_rate | uptime | |---|---...
1.First we need to define the first port for WAN connection so the router will connect to the internet via another router with DHCP. In winbox clickIP > DHCPClient andAdd DHCP Clientto portether1 2.Let's add the hotspot service to wlanClick IP > HotSpotand the hotspotSetupbox, choosewl...