执行CMD,并将当前目录变更为进入pico-examples根目录,并在其中新建build子文件夹。 cd pico-examples mkdir build cd build 进入build文件夹: 在当前目录下执行: cmake -G "MinGW Makefiles" .. 执行结果为: Using PICO_SDK_PATH from environment ('G:\bsp\RP2040\pico-sdk') PICO_SDK_PATH is G:/bsp/...
MicroPython Examples Examples to accompany the "Raspberry Pi Pico Python SDK" book published by Raspberry Pi Ltd, which forms part of the technical documentation in support of Raspberry Pi Pico and the MicroPython port to RP2040. Note: There are also additional examples for the RP2040 port of ...
BPI-Pico-RP2040官方介绍如下: 其核心是RP2040,采用的是ARM Cortex M0+ CPU内核,运行频率高达 133 MHz。 比一般使用Cortex M0+的MCU更强大的是,RP2040使用了双核ARM Cortex M0+,既然是双核的,那么我们就可以在BPI-Pico-RP2040运行多线程程序了,更好的挖掘出其潜力来。 多线程了解 关于什么是多线程,本文不讲...
The examples are supported on 4 ports: stm32, esp32, rp2, and mimxrt. To use I2S with MicroPython on the Pyboards, ESP32, Raspberry Pi Pico, and mimxrt boards you will need to install a version of MicroPython firmware that supports I2S. For these ports, I2S is supported in the v...
树莓派Pico的mpy例子，写几个作为参考使用： import machine import utime sensor_temp = machine.ADC...
树莓派Pico + MicroPython驱动2.4寸SPI串口屏(ST7789) ST7789是一种常用的液晶屏控制芯片(最大支持的分辨率为240×320),可与单片机之间通过SPI通信传送控制指令或者数据。在MicroPython环境下使用ESP32或者树莓派Pico可以直接下载st7789_mpy库预先编译好的固件firmware来尝试控制液晶屏,支持的各种单片机开发板如下表所示。
MicroPico. MicroPico (aka Pico-W-Go) is a Visual Studio Code extension designed to simplify and speed up the development of MicroPython projects for the Raspberry Pi Pico and Pico W boards.. awesome-micropython. Curated list of awesome MicroPython resources. MicroMLP. A micro neural network mu...
examples/ -- a few example Python scripts. "make" is used to build the components, or "gmake" on BSD-based systems. You will also need bash, gcc, and Python 3.3+ available as the command python3 (if your system only has Python 2.7 then invoke make with the additional option PYTHON=...
pico-sdk: update to latest version 1.1.0 drivers: no changes specific to this component/port mpy-cross: no changes specific to this component/port 支撑组件 docs: library/uasyncio.rst: add docs for ThreadSafeFlag develop/cmodules.rst: document C-modules and micropython.cmake ...
cdmicropython git submodule update --init lib/tinyusb git submodule update --init lib/pico-sdkcdlib/pico-sdk git submodule update --init lib/tinyusb You'll also need to compilempy-cross: cd../../mpy-cross make That's all you need to do for themicropythonrepository. Now, let us clone...