f-strings don’t support !a conversions 用户定义类的特殊方法 __del__ 未实现 方法解析顺序(MRO)不符合 CPython Private Class Members name mangling is not implemented 从多个类继承时,super() 只调用一个类 在子类中调用 super() getter 属性将返回一个属性
MicroPython也支持格式化字符串,可以使用%操作符或f-string(在支持f-string的MicroPython版本中)。 使用%操作符 python name = "Bob" age = 25 print("Name: %s, Age: %d" % (name, age)) 输出: text Name: Bob, Age: 25 使用f-string(如果支持) python name = "Charlie" age = 35 print(f"Na...
MicroPython - a lean and efficient Python implementation for microcontrollers and constrained systems - f-string thousands separator for float · micropython/micropython@05ea585
MicroPython设计为可在微控制器上运行。熟悉常规计算机的程序员可能不熟悉这些硬件限制。 尤其是RAM和非易失性”磁盘”(闪存)存储量是有限的。本教程提供了充分利用有限资源的方法。 由于MicroPython在基于各种体系结构的控制器上运行,因此所提供的方法是通用的:某些情况下, 需要从平台特定的文档中获取详细信息。
Qstr pools are now sorted, which provides a significant performance boost forqstr_find_strn(), which is called a lot during parsing and loading of .mpy files, as well as interning of string objects, which happens in most string methods that return new strings. The static pool (part of th...
f\x0f\xfc\x03\xe0\xfc\x7c\xf8'\b'\x0f\x83\xe1\xf3\xe0\x7e\x0f\x8f\x8f\xc3\xf8\x3e\x7e\x1f\x1f\xc0'\b'\x00\x00\x00\x00\x00\xff\xe7\xff\xff\x87\xff\x3f\xff\xfc\x7f\xf9'\b'\xff\xff\xe3\xff\xcf\xff\xff\x03\xf0\x07\xe0\x00\x1f\x80\x3f\...
const() 的参数可为在编译时计算结果为常量的任何值,如 0x100、1 << 8 或(True, "string", b"bytes") (有关详细信息,请参阅下面的一节)。甚至可包括其他已定义的常量符号,如 1 << BIT。 常量数据结构 若存在大量常量数据,且平台支持从Flash执行,则RAM可能会如下保存。数据应该位于Python模块中并冻结为...
创建动态字符串的最佳方法是使用 stringformat() 方法: var = "Temperature {:5.2f} Pressure {:06d}\n".format(temp, press) 缓冲器 在访问 UART、I2C 和 SPI 接口等设备时,使用预先分配的缓冲区可避免创建不必要的对象。考虑这两个循环: while True: var = spi.read(100) # process data buf = byt...
sleep(0.5) >>> f.close() 文件写入 向文件中写入数据同样要先打开文件(文件已存在)。 代码语言:javascript 代码运行次数:0 运行 AI代码解释 f = open(filename, mode) 然后向文件中写入数据。 代码语言:javascript 代码运行次数:0 运行 AI代码解释 fd.write(str) 示例: 代码语言:javascript 代码运行次数...
这是由于我们在编写 MicroPython 函数的时候,实际芯片的移植可能会和我们所期待的接口有所差异导致的,运气好的是,我需要的 String 对象可以通过fs_info_t *cfg = vfs_internal_open("/flash/config.json", "rb", &err);得到。 这个json.load 函数是允许用户传递一个 StringIO 的对象(mp_obj_stringio_t)进...