data =bytes() data = uart0.read(10)print(data.decode('utf-8'))# 解码成 utf-8 字符串print(uart0.readline())# 从串口读取一行 有些时候需要判断串口中有没有数据,可以使用any()方法。 whileuart0.any() >0:print(uart0.readline()) 💡 提示 在部分
led=machine.Pin(2,machine.Pin.OUT)#4.接收网络数据whileTrue:recv_data,sender_info=udp_socket.recvfrom(1024)#4.1.解码 recv_data_str=recv_data.decode("utf-8")try:print(recv_data_str)except Exceptionasret:print("error:",ret)#5.处理接收的数据ifrecv_data_str=="开灯":print("这是要开灯的...
print("Received data from module:", received_data)data_str = received_data.decode('utf-8').st...
data=a.recv(1024) #客户端发送的数据存储在recv里,1024指最大接受数据的量 print(data.decode('utf-8')) #接收的数据必须进行解码显示 message=input("you can say:") a.send(message.encode('utf-8')) #发送的数据编码发送 if message==('bye'): break 客户端: ESP32上电连接好热点后直接新建文件...
b = ser.readline()#read a string from port b = b.decode("utf-8") print(b) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 测试接收:完全ok! 不过有个缺点就是调试起来可能会和串口冲突,如果产品开发的差不多了,就可以直接用USB作为串口即可,挺好用的。 参考文章:...
self.width= 128 // 8#每行可显示的最大字符数self.height = 64 // 8#能显示的最大行数self.buffer = [""] * self.height#初始化每行的空内容defwrite(self, data):#解码字节数组str_data = data.decode('utf-8')#分批次写入缓冲forcharinstr_data:ifchar =='\n'orlen(self.buffer[-1]) >=...
any()).decode('utf-8') # 读取数据并解码 return None try: while True: # 发送数据 send_data("Hello, UART! ") # 读取数据 received_data = read_data() if received_data: print("Received:", received_data) # 延时 time.sleep(1) except KeyboardInterrupt: print("Program stopped") 4. ...
需要注意的是,上位机在发送字符串之前,需要将字符串(str)转换为字节(byte)格式,所以需要使用[发送数据].encode("utf-8")实现对发送字符串的转换。同时,在接收到下位机传来的信息时也需要使用[接收数据].decode("utf-8")实现接收的字节数据转换为字符串数据。
可以使用 Python 内置的`str.encode()`和`bytes.decode()`方法实现编码和解码操作。例如,要将一个 UTF-8 编码的字符串转换为 GBK 编码,可以使用`str.encode()`方法将字符串转换为字节对象,然后使用`bytes.decode()`方法将字节对象转换为 GBK 编码的字符串。 总之,微Python 中的字符编码是一个重要且实用的...
Re: esptool.py fails with error UnicodeDecodeError: 'utf-8' codec can't decode byte 0xf0 (micropython build) Postbyjulcol»Tue Oct 29, 2024 7:08 am I forgot to mention that before moving to release mode, in developer mode, things were fine. ...