Micro-pittingdoi:10.1007/978-0-387-92897-5_100895Rolling Bearing Fatigue Life, Effect of Profiles, Effect of Surface Roughness, Effect of Residual StressSpringer US
The test results confirm that the properties of the compound layer are decisive for the micro-pitting and wear resistance of nitrided gears. For a high micro-pitting resistance, the presence of pores in the near-surface area of the compound layer is of high importance, since no micro-pitting...
aThe pitting spots that appear in some micro-areas of the films extend into the interface between MoS2 film and bearing substrate, even into the substrate. 在影片的一些微区域出现的点蚀斑点延伸到MoS2影片和轴承基体之间的接口,甚而入基体。[translate]...
Sánchez-Tovar R,Montaes M T,García-Antón J.Effect of the micro-plasma arc welding technique on the microstructure and pitting corrosion of AISI316L stainless steels in heavy LiBr brines. Corrosion Science . 2011Sanchez-Tovar, R.; Montanes, M.T.; Garcia- Anton, J., Effect of the ...
Micro-pitting fatigue lives of lubricated point contacts: Experiments and model validation. International Journal of Fatigue, 2013, 48: 9-18.Li S, Kahraman A. Micro-pitting fatigue lives of lubricated point contacts: experiments and model validation. Int J Fatigue 2013;48:9-18....
A standard tube for detecting a micro-pitting includes a body, a pin hole of 1.3 mm diameter, a pin hole of 80%, and an additional pin hole. The body has a predetermined thickness. The pin hole of 1.3 mm diameter is formed on a predetermined position of the body. The pin hole of ...
Micro-pitting on gears has been recognized in several gear box applications for a long time. Increasing demands concerning durability and reliability of the components and the sometimes severe operating conditions of wind turbine gear boxes have enhanced in recent years the necessity for a better ...
The present invention relates to an anti-micro-pitting industrial gear oil composition, wherein the preparation method is first of all the components of the mineral base oil, 5.0 to 10.0% polyester, 0.2 to 3.0% depressant components are mixed heated to 60 ~ 70 ℃, reconcile 0.5 to 1 hour...
Here, we explore the ability of ZrO 2 NCs to form protective tribofilms under harsh conditions using a micro-pitting rig (MPR), consisting of a three ring-on-roller configuration. The experiments were conducted in polyalphaolephin (PAO) base oil, with and without 5nm diameter ZrO 2 NCs,...
Glodež, et al., “Numerical modelling of micro-pitting of gear teeth flanks,” Fatigue Fract. Eng. Mater. Struct. , 26 , No. 12, 1135–1143 (2003).FAJDIGA G, FLANKER J, GLODEZ S, et al. Numerical modelling of micro-pitting of gear teeth flanks[J]. Fatigue & Fracture of ...