Using MEPCM + EG reduces the temperature drop at the heat exchanger outlet about 15 掳C compared to the case of pure MEPCM.doi:10.1016/j.apt.2020.04.006Tian-Hu Wang a bTien-Fu Yang c dChung-Hao Kao cWei-Mon Yan c dMohammad Ghalambaz e fAdvanced Powder Technology...
Two-dimensional (2D) MEMS actuators are often used for 3D imaging, although there are some alternative approaches with conventional cable-based actuation and scanning mechanisms driven by rotation motors and pulling stations. The OCT imaging system has been successfully applied to ophthalmology and ...
The second type of Sensors 2017, 17, 1066 5 of 14 power supply uses a 5 V/1 A power cable. As there is a requirement for long-term and continuous monitoring, it is recommended that the second type of power supply is used. The power consumption of RH/T sensors depends on the ...
hv photonics Article Optical Trapping of Sub−Micrometer Particles with Fiber Tapers Fabricated by Fiber Pulling Assisted Chemical Etching Chaoyang Ti, Yao Shen, Yiming Lei and Yuxiang Liu * Department of Mechanical Engineering, Worcester Polytechnic Institute, Worcester, MA 01609, USA; chaoyang@wpi...
Due to the small footprint of the DMD chip itself and its cable-remote controlling mechanisms, it can be further used for the desired in situ testing under high-resolution optical or electron microscopes (e.g., scanning electron microscope (SEM)), which allows real-time monitoring of the ...