Monheit GD. The Jessner's + TCA peel: a medium depth chemical peel. J Dermatol Surg Oncol 1989; 15:945-50.Monheit GD. Medium-depth chemical peels[J].Dermatologic Clinics,2001.413-25.doi:10.1016/S0733-8635(05)70282-5.Monheit GD. Medium-depth chemical peels. Dermatol Clin. 2001;19(4):...
摘要: The combination medium-depth chemical peel (Jessner's solution +35% TCA) has been accepted as a safe, reliable, and effective method for the treatment of moderate photoaging skin. This article discusses the procedure in detail, including postoperative considerations....
Chemical peels are an effective treatment for wrinkles, but their use is limited because of the associated risk of scarring, hypopigmentation, and the inability to accurately control the depth of tissue injury. High energy, pulsed, or computer scanned continuous wave carbon dioxide (CO2) lasers ...
The Jessner's + TCA peel: a medium-depth chemical peel. The Jessner's + TCA peel, a method of chemexfoliation, is a combination of two acidic compounds. It has been found to be an effective peeling procedure tha... MONHEIT,D Gary - 《Journal of Dermatologic Surgery & Oncology》 被引...
Based on the light field, the camera perspective could be chosen in post-production and depth information was generated to steer the focus. Initially only the strings of the chello are visible. The focus moves perfectly with the musician's hand movements. Then the entire bow is in focus, ...
depth, the solution chemically evolves. The increase of the pH causes the dissolution of glass and the saturation of the solution leads to the precipitation of secondary phases such as calcite. The latter has a high crystallization pressure, which induces the detachment of the scales delimited by...
A cleaning sheet comprises a sheet-shaped base and an adhesive layer formed on at least one surface of the sheet-shaped base member. The adhesive layer has an adhesive strength in the range of 0.1-0.5 gf according to a 180-degree peel-off method provided by JIS Z-0237. Or the adhesive...
For example, such a phenomenon that the depth or width of the grooves is smaller than the intended shape on the substrate surface is less likely to take place. In a case where the protective layer A is formed as the second protective layer, the thickness of the second protective layer is...
This composite had a corrugation depth of 0.016″ on the meltblown nanofiber coated side and 0.018″ on the reversed, uncoated (wire) side. The mean peel strength of the nanofiber layer to the base substrate was 2.0 ounces per inch width. 14. Sample N Sample N was prepared by forming a...
It should be noted that a sufficient degree of surface roughness may be achieved to prevent playability long before the entire sublimation (smoothing) layer has been lost to the surrounding medium, depending on the height and/or depth of the features provided on the non-flat surface of the ...