Got some low-carbon steel, medium carbon steel and other steel mechanical properties. 翻译结果2复制译文编辑译文朗读译文返回顶部 Have some mechanical properties of low carbon steel, carbon steel and other steel products. 翻译结果3复制译文编辑译文朗读译文返回顶部 ...
low alloy steelmechanical propertiesTo investigate a potentially more weldable HY-130 steel (130 ksi, or 897 MPa, minimum yield strength), the U. S. Steel Technical Center produced and evaluated several conventionally rolled and quenched and tempered (QT) and controlled-rolled (RCR), direct-...
The effects of acid rain corrosion on mechanical properties of low carbon steel Q235 was studied through accelerated corrosion test and tensile test.The results show that with the increase of corrosion degree,the yield stage decreased till disappeared and the tensile strength of the low carbon steel...
effects of tantalum content on the microstructure and mechanical properties of low-carbon rafm steel:(钽内容的影响低碳rafm钢的显微组织和力学性能) Journal of Nuclear Materials 479 (2016) 295 e301 Contents lists available at ScienceDirect Journal of Nuclear Materials journal homepage: /locate/jnucmat ...
An ultra low carbon interstitial free (IF) steel was severely deformed by the six-layer stack accumulative roll-bonding (ARB) process for improvement of the mechanical properties. As-received material with 1 mm in thickness showed a recrystallization structure with average grain diameter of 27 μm...
The aim of this research work is to study the effect of boron addition on mechanical properties and microstructure of a new family of low carbon NiCrVCu advanced high strength steels (AHSS). Experimental steels are thermo-mechanically processed (TMP) (hot-rolled+quenched). Results show that the...
Influence of soaking time in deep cryogenic treatment on the microstructure and mechanical properties of low-alloy medium-carbon HY-TUF steel The influence of soaking time in deep cryogenic treatment on the tensile and impact properties of low-alloy medium-carbon HY-TUF steel was investigated in ....
The effect of martensite volume fraction on the mechanical and corrosion properties of low carbon dual phase steel is studied based on both step quenching ... M Soleimani,H Mirzadeh,C Dehghanian - 《Steel Research International》 被引量: 0发表: 2020年 Corrosion Resistance and Mechanical Properti...
Conference on High Performance Cutting Influence of machining on the microstructure , mechanical properties and corrosion behaviour of a low carbon martens... The influence of cutting conditions of a low carbon martensitic stainless steel (15.5wt.% Cr, 4.8% Ni, 1% Mo, 0.9% Mn, 0.24% Si, 0.1...
A series of experimental tests on AISI 1022 low carbon steel wire are carried out and the Taguchi method is used to obtain optimum spheroidized annealing conditions to improve the mechanical properties of steel wires for cold forming. The results show that the spheroidized annealing temperature and...