EN8 mild steelIn recent days the coating process of the different materials are very important to progress the mechanical properties and also increase the corrosion resistance. For this study aimed to carry out the coating process with Carbon nano tubes (CNT) coating on to the EN8 mild steel ...
After annealing of steel welds of both grades of medium carbon steel welds, a change in the grain size was observed and that lead to the change in its mechanical properties. From present research work, it can be concluded that the heat-treated and un-heat treated specimens have different ...
Mechanical propertiesMedium carbon steelMicrostructuresSolid phase mixturesTensile testThe effect of microstructural evolution on mechanical properties of unalloyed medium carbon (EN8) steel with emphasis on the effects of grain size within solid phase mixtures and the mechanical respon...
The influence of process parameters such as frictional force, rotational speed, and table traverse speed individually denoted as C1–C8 on tensile properties, bending strength, flash width and face diameter of bar was evaluated. The mechanical performance studies stated that the maximum hardness values...
2010 Analysis of fatigue crack growth and estimation of residual life of the walking beam of an oilfield pumping unit 热度: High temperature tensile properties and fracture behavior of cast nickel-base K445 superalloy 热度: 176 J.Mater.Sci.Techno1..V0L18No.2.2002 ...
Li X, Li Y, Wei Y, Hou L, Liu B, Qu H, Wang Y (2018) Effect of surface self-nanocrystallization and Si infiltration on Si diffusion behavior, hardness and magnetic properties of pure Fe. J Iron Steel Res Int 25(9):923–931. https://doi.org/10.1007/s42243-018-0135-y Article Go...
Hence, the present study investigates the role of Short time heat treatment and Laser treatment process on the mechanical properties of NiCrBSi and NiCrBSi–WC coatings. In addition, this article elucidates the significance of interface chemistry and morphology on the bonding strength between the substr...
Hence, in order to achieve better mechanical properties, the treatment time employed for SMAT of carbon steels should be carefully optimized. The other option available is to choose lower size balls for SMAT. The change in residual stress of EN8 steel as a function of process parameters ...
The mechanism by which liquid media that do not cause swelling act on PA-6 with a low moisture content and the effect of a plasticizing liquid on PA-6 swollen to the equilibrium extent in the same liquid during the straining of the polymer in uniaxial tension have been investigated. During...
Bala Chennaiaha M., Nanda Kumarb P., Prahlada Raoc K. Influence of heat input and PWHT on the microstructure and mechanical properties in dissimilar (IS2062-EN8) welded joints, Procedia Computer Science, vol. 85, 2016, pp. 54 - 61....