Mechanical Properties of Composite Materials Composite materials, also known as composites, are materials made up of two or more constituent materials with different physical and chemical properties that, when combined, produce new and advanced materials with superior properties. Composite materials are ...
It was found that the addition of ceramic particles causes a very small increase in the hardness and 0.2% yield strength, but a decrease in the transverse rupture strength is observed. In order to eliminate the influence of martensite on the mechanical properties, measurements were also conducted...
Mechanical Properties of High-Density Polyethylene/Chlorinated Polyethylene Blends Mechanics of Composite MaterialsMAKSIMOV R.D., IVANOVA T., KALNINS M., ZICANS J., Mechani- cal properties of high-densitypolyethylene/chlorinated poly-... RD Maksimov,T Ivanova,M Kalnins,... - 《Mechanics of Compos...
Identification of mechanical properties of composites based on design of experiments A numerical-experimental method for the identification of mechanical properties of laminated polymeric composites from the experimental results is being de... R Rikards,A Chate - 《Mechanics of Composite Materials》 被引...
Graphene, as an emerging two-dimensional carbon nanomaterial, has attracted widespread attention and in-depth research by domestic and foreign researchers. With its excellent mechanical properties, g...
A cobalt sulfide/PVDF(Polyvinylidene Fluoride) composite was prepared by a simple blending method, and the microstructure of the composite was investigated through X-ray diffraction, scanning electron microscopy, and field emission scanning electron microscopy. Increased absorption properties at frequencies ...
Mechanical properties of C-SiC composite materials fabricated by the Si-Cr alloy melt-infiltration methoddoi:10.1177/0021998314559279... S Kim,IS Han,YH Seong,... - 《Journal of Composite Materials》 被引量: 0发表: 2014年 Ternary alloying study of MoSi2 Ternary alloying of MoSi 2 with adding...
Studies on mechanical properties of wood-polymer composites Composite plates of wood chips and high density polyethylene (HDPE) matrix were prepared and characterized. Mechanical properties of these composites were ... Razi,PS,Raman,... - 《Journal of Composite Materials》 被引量: 35发表: 1997年...
During the preheating treatment preceding the processing of C/Al composites, a decrease in the mechanical properties of the carbon fibres is generally observed, owing to the oxidation of the fibres. Thus, it implies the use of a surface coating likely to resist the oxidation of the fibres. In...
To begin with, we synthesized (Ti,V)C powder, the solid-solution phase of Ti–V–C, by mechanically alloying Ti–V alloy/graphite powder mixture. The sintering behavior of (Ti,V)C–Ni composite was investigated in terms of the shrinkage rate, thermal properties and microstructure evolution....