17-4 ph stainless steelMechanical properties and microstructures of 17-4 ph stainless steel parts produced using different binder contents (powder loading) of powder injection molding (PIM) feedstock have been studied. The tensile and wear properties have been evaluated. Wear tests were conducted by...
In this work, the widely used 17-4 PH stainless steel filament was selected to study the effect of different deposition strategies of ADAM technology on mechanical properties. The printed parts had mechanical properties comparable to those obtained by other more developed AM technologies. In the ...
For instance, different aging temperatures give different mechanical properties of 17-4PH: aging treatment at 482 °C yields the maximum strength, while that at 593 °C improves its ductility [3]. Show abstract Comparative study on the properties of 17-4 PH stainless steel parts made by metal...
As with other composites, transparent wood laminates from unidirectional plies (laminae) can be prepared to tailor mechanical performance of the laminate by control of fiber direction of each ply (lamina) [4]. In order to design elastic properties of laminates, four in-plane elastic parameters of...
Despite the economic and ecological importance of corals’ skeletal structure, as well as their predicted vulnerability to future climate change, few studies have examined the skeletal mechanical properties at the nanoscale. As climate change is predicted to alter coral growth and physiology, as well ...
The particle size distribution curve obtained by the sieving method is shown in Figure 4. The loess is collapsible. Figure 2 Open in figure viewerPowerPoint Study area and bitmap. Figure 3 Open in figure viewerPowerPoint Sampling point and study slope. Table 1. Physical Properties of the ...
Herein, we introduce a method to locally modify the mechanical properties of a soft, biocompatible material through the exploitation of the effects induced by the presence of a local temperature gradient. In our hypotheses, this induces a concentration g
properties of native tissues. These materials also exhibit anisotropic degradation as a consequence of the presence of both amorphous and crystalline domains which leads to limited control over the resorption timelines2,3,4. Attempts to engineer elastomeric materials with mechanical properties similar to ...
The reaction was continued for 4 h at 50 °C while the pH of the solution was maintained at 8 by adding 5 N GGMA and GelMA synthesis The mechanical properties of hydrogels mainly depend on the original rigidity of polymer chains and the crosslinking density [8]. GG, a polysaccharide, ...
The mechanical properties of the cell envelope in Gram-negative bacteria are controlled by the peptidoglycan, the outer membrane, and the proteins interacting with both layers. In Escherichia coli, the lipoprotein Lpp provides the only covalent cros