N. Kurgan, R. Varol, Mechanical properties of P/M 316 L stainless steel materials, Powder Technol. 201 (2010) 242-247.N. Kurgan, R. Varol, Mechanical properties of P/M 316L stainless steel materials, Powder Technology 201 (2010) 242-247. [5]. I.M Sas-Boca., T. Canta, D. ...
By means of Surface Nano-Crystallization (SNC), a nanostructured surface layer was formed on 316L stainless steel plate, with the grain refined into nanoscale. The grain sizes are about 12nm at the top surface layer, and gradually increase with the depth. Mechanical properties of nanostructured su...
and Davies P., Mechanical Properties of Metal Injection Moulded 316L Stainless Steel Using Both Prealloy and Master Alloy techniques, Powder Metallurgy, 2004; 47(4): 367-373.Heaney, D.F., T.J. Mueller, and D. P.A., Mechanical properties of metal injection moulded 316l stainless steel ...
摘要: Selective laser melting ; Microstructures ; Stainless Steel AISI 316L ; Mechanical Properties ; LiMaRC - Liège Materials Research Center关键词: Selective Laser Melting (SLM Stainless Steel AISI 316L Microstructure Mechanical Property 被引量: 19 ...
A comparative study on mechanical properties and microstructure of 316L austenitic stainless steel between solution treated specimen and hot rolled specimen was conducted. After a specimen was subjected to solution treatment at 1050 °C for 6 min, its mechanical properties were determined through tensile...
In this paper, the effects of 3D-printed 316L stainless steel at different shot peening (SP) durations have been compared in terms of microstructure and mechanical properties. The changes of microstructure and mechanical properties have been investigated, which concluded as follows: (1) The microstru...
Austenitic Stainless Steel grade 304L and 316L are very important alloys used in various high temperature applications, which make it important to study their mechanical properties at elevated temperatures. In this work, the mechanical properties such as ultimate tensile strength (UTS), yield strength...
Mechanical properties of metal injection moulded 316L stainless steel using both prealloy and master alloy techniques. and Davies P., Mechanical Properties of Metal Injection Moulded 316L Stainless Steel Using Both Prealloy and Master Alloy techniques, Powder Metallurgy, 2004... Heaney,F D.,Mueller,...
Stainless steel 316L (SS316L) vertical struts with various diameters ranging from 0.25 mm to 5 mm were manufactured by laser powder bed fusion (LPBF) process. A systematic investigation was conducted on the microstructure and mechanical properties of the produced struts. The struts possessed hierarch...
Analysis of wire arc-based directed energy deposition stainless steel microstructure.Mechanical characterisation in different directions relative to the deposition trajectory.Analysis of the anisotropy in mechanical properties of the deposited walls.The maximum mismatch in tensile strength, between the samples,...