which is expected after the rebuild, as the new disk has been integrated into the array.Resyncnow indicatesnot required, signifying that the array doesn’t need any further synchronization, as it’s completely rebuilt and back to its optimal state. ...
No writes will be allowed to the array, and no resync, recovery, or reshape will be started. It works with Create, Assemble, Manage and Misc mode. -a, --auto{=yes,md,mdp,part,p}{NN} Instruct mdadm how to create the device file if needed, possibly allocating an unused minor ...
mdadm --manage /dev/md0 --remove /dev/sdc mdadm --manage /dev/md0 --add /dev/sdc 看看有没有起效, 如没有再试试 mdadm --assemble --update=resync /dev/md0 /dev/sdb /dev/sdc 昨天虚拟机一下挂了, 然后没同步完成. 现在状态 resync=PENDING 输入 mdadm --readwrite /dev/md0 搞定 前几...
Insist thatmdadmaccept the geometry and layout specified without question. Normallymdadmwill not allow creation of an array with only one device, and will try to create a raid5 array with one missing drive (as this makes the initial resync work faster). With--force,mdadmwill not try to be ...
- Fix Monitor mode sometimes crashes when a resync completes - Fix missing symlink for mdadm container device when incremental creates the array - Make sure when creating a second array in a container that the second array uses all available space since leaving space for a third array ...