单1 秒内建立的 TCP 会话的最大数目。 翻译结果4复制译文编辑译文朗读译文返回顶部 最大数量的TCP会议设立了一个单一的1-第二期。 翻译结果5复制译文编辑译文朗读译文返回顶部 TCP会话的最大数字在一个1第二个期间建立的。 相关内容 a他是久旱的甘霖 He is the prolonged drought timely rain[translate] ...
Re: maximum socket number Hi Tim,The maximum TCP port number is (2^16)-1 or 65535 on HP-UX and a host of other operating systems.PCS 0 Kudos Tim Nelson Honored Contributor 02-12-2007 06:34 AM Re: maximum socket number Thanks Steven,I see some settings for smallest por...
第一步:pure-ftpd是支持被动模式连接的,被动模式连接方式需要服务端打开一个随机端口,先试试用主动模式是否可以连接,我使用的Filezilla软件(一般客户端软件都支持),如果可以连接一般原因就是服务端的随机端口被防火墙给阻拦掉了。 第二步:cat /proc/sys/net/ipv4/ip_local_port_range该文件,该文件是tcp的预留端口配...
this feature allows a router to bring down a peer when the number of received prefixes from that peer exceeds the configured Maximum-Prefix limit. This feature is commonly used for external BGP peers, but can be applied to internal BGP peers also. ...
错误检查 0x150:TCPIP_AOAC_NIC_ACTIVE_REFERENCE_LEAK 错误检查 0x151:UNSUPPORTED_INSTRUCTION_MODE 错误检查 0x152:INVALID_PUSH_LOCK_FLAGS 错误检查 0x153:KERNEL_LOCK_ENTRY_LEAKED_ON_THREAD_TERMINATION 错误检查 0x154:UNEXPECTED_STORE_EXCEPTION
netsh int ipv6 set dynamicport udp start=2000 num=63000 然后修改一下注册表缩短time-wait的时间。 regedit打开注册表,添加 DWORD值 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters “MaxUserPort”=dword:0000fffe “TcpTimeWaitDelay”=dword:0000005 (缩短为5 ...
(Optional) TCP port of the server to be added to the redirect server group. Command Default A server is not added to the redirect server group. Command Modes Layer 4 redirect server group configuration Command History Release Modification 12.2(28)SB This command was introduced. Cisco IOS...
netsh int ipv6 set dynamicport udp start=2000 num=63000 然后修改一下注册表缩短time-wait的时间。 regedit打开注册表,添加 DWORD值 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters “MaxUserPort”=dword:0000fffe “TcpTimeWaitDelay”=dword:0000005 (缩短为5 ...
'enable_reuse_port' => true, # Enabling port reuse allows for starting multiple Server programs listening on the same port. # Keep-Alive connections. 'open_tcp_nodelay' => true, 'tcp_keepidle' => 600, 'tcp_keepinterval' => 60, ...
[password] using '(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=[hostname]) (PORT=[port number]))(CONNECT_DATA=(SID=[ORACLE_SID])))'; where [custom database link], [user], [password], [hostname], [port number], and [ORACLE_SID] reflect the new Oracle Net listener for the database ...