POLY(ETHERETHERKETONE) PEEKDEPOSITION EFFICIENCYCOPPERIMPACTBEHAVIORJournal of Thermal Spray Technology - The potentials of the cold spray process, as novel manufacturing technology, are yet to be fully explored in the area of polymeric materials. In the present......
properties relevant to textile integration. Later, the discussion extends to a group of materials–integration techniques for textiles, while more focus is put on the fiber-spinning and surface-deposition protocols. Subsequently we delve into a variety of emerging applications as reported in literature,...
select article Effects of printing parameters on hardness and wear characteristics of 3D printed polyetheretherketone (PEEK) polymer Short communicationAbstract only Effects of printing parameters on hardness and wear characteristics of 3D printed polyetheretherketone (PEEK) polymer Karunanithi Chithambaram, ...
Polyetheretherketone (PEEK) is among the more advanced materials for 3D printing. It works by using FDM or selective laser sintering (SLS) technologies. It’s most often used to make high-performance builds for aerospace, medical, and automotive applications, and it requires printing at a high h...
Even beneath the reversals, his previous faces to the world accumulate and peek out slightly askew from “today’s” view until at the end you can hardly tell what view would be next. To which the M.L.A would reply, does reply, “Yes, why not?” Points of Reference (2022) Points ...
About PEEK Rod & Sheet: PEEK is a high performance engineering thermoplastic that offers chemical and water resistance similar, but can operate at higher temperatures. PEEK can be used continuously to 480°F (250°C) and in hot water or steam without permanen...
engineering and in the development of new technologies has enabled Roboze to market a wide range of innovative 3D printing solutions, such as our HVP extruder which can reach extrusion temperatures up to 550°C and is able to process high-viscosity polymers such as PEEK, Carbon PEEK, and ...
(PEEK) and HA, and prepared PEEK-HA/GO scaffolds, which has good biological activity and biocompatibility. At the same time, the compressive strength and modulus of PEEK-HA/GO scaffolds (65.41 MPa and 3.85 GPa) is significantly higher than that of PEEK-HAP (36.45 MPa and 2.71...
Polymers are also used for cranial orthopedic applications as an alternative for titanium alloys. Polyester ether ketone (PEEK) provides excellent mechanical properties and long-term biocompatibility, ideal for this type of neurosurgical applications [84]. Ultra-high molecular weight polyethylene (UHMWPE)...
Qu, H., et al. (2022). Influence of thermal processing conditions on mechanical and material properties of 3d printed thin - structures using PEEK material.International Journal of Precision Engineering and Manufacturing,23(6), 689–699.