针对你遇到的“make: qemu-system-riscv64: command not found”问题,我将按照你提供的tips逐一进行解答: 确认qemu-system-riscv64是否已经安装: 要确认qemu-system-riscv64是否已经安装在你的系统上,可以尝试在终端中运行以下命令: bash qemu-system-riscv64 --version 如果系统返回版本信息,则说明qemu-system...
我试图在Makefile编译中执行。我已经编辑了: qemu:我通过命令$<em 浏览0提问于2018-11-17得票数0 回答已采纳 0回答 MinGWmake显示“未指定目标且未找到生成文件”错误 、、、 我在我的windows7命令提示符上。在安装cmake之后,前两个命令终于完成了,我只需要让最后一个命令工作即可。我没有make,所以我安装...
3. make install 成功安装qemu-2.1.3 要注意最后使用sudo make install来完成安装 配置 首先测试qemu和内核能否运行成功,编译出来的内核是否OK,或者qemu对vexpress单板支持是否够友好。 运行如下命令: qemu-system-arm -M vexpress-a9 -m 512M-kernel /home/ivan/kernel_git/linux/arch/arm/boot/zImage -nograph...
‘qemu_egl_init_surface_x11’: ui/egl-helpers.c:246:21: error: expected expression before ‘EGLSurface’ if (esurface == EGL_NO_SURFACE) { ^ ui/egl-helpers.c: In function ‘qemu_egl_get_display’: ui/egl-helpers.c:293:22: error: expected expression before ‘EGLDisplay’ EGLDisplay...
利用以下方法之一启动系统镜像。 a. 在QEMU上启动 PetaLinux 镜像,请参见 启动 QEMU 上的 PetaLinux 镜像。 b. 利用 SD 卡在硬件上启动 PetaLinux 镜像,请参见 利用 SD 卡在硬件上启动 PetaLinux 镜像。 c. 利用 JTAG 在硬件上启动 PetaLinux 镜像,请参见 利用 JTAG 在硬件上启动 PetaLinux 镜像。
The selected configuration is controlled by Makefile variables passed by make command For run_openocd and run_gdb target, if you want to change a new gdb port, you can pass the variable GDB_PORT For run_qemu, only SOC=evalsoc supported, when do this target, you can pass SIMU=qemu to...
On WSL platform, compiling 32bit requires qemu. Refer to this. To update package installed by pip, run pip3 install <package> --upgrade. Cygwin Download Cygwin installer and run: setup-x86_64.exe -R "C:\cygwin64" -q --packages="bash,binutils,bzip2,cygwin,gcc-core,gcc-g++,cygwin32-gc...
make -n - displays only logical operation, not command line being executed. E.g. CC source.cpp make --debug=j - works as well, but might also enable multi threaded building, causing extra output. make VERBOSE=1is for CMake. Your trials were most likely with GNU autotools-based projects...
-- Board: qemu_x86_64, qualifiers: atom -- ZEPHYR_TOOLCHAIN_VARIANT not set, trying to locate Zephyr SDK -- Found host-tools: zephyr 0.16.8 (<ZEPHYR_SDK_INSTALL_DIR>) -- Found toolchain: zephyr 0.16.8 (<ZEPHYR_SDK_INSTALL_DIR>) ...
not create symlinks oe-workdir/oe-logs in the src dir EXTERNALSRC_SYMLINKS = "" # Setting the customized envionment variables of Cbuild ENV_TOP_DIR = "/home/lengjing/data/cbuild-ng" ENV_CFG_ROOT = "/home/lengjing/data/cbuild-ng/build/qemux86-64/config" ENV_BUILD_MODE = "yocto" ...