使用mac ping 同一个路由器上的 ip 地址时遇到如下情况 当mac 插上网线时,可以 ping 通 当mac 连上该路由器,会出如下错误: Request timeout for icmp_seq ping: sendto: Host is down ping: sendto: No route to host 百度上的办法各种没有,还是谷歌犀利 解决办法:设置-> wifi-> 高级->TCP/IP->IP...
mac ping: sendto: Host is down PING不通别人的ip,可以ping通路由器 PING 192.168.1.131 (192.168.1.131): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 Request timeout for icmp_seq 3 ping: sendto: No route to host Request t...
ping: sendto: No route to host ping: sendto: Host is down ping: sendto: Host is down ping: sendto: Host is down ping: sendto: Host is down 如果你的本地连接是有问题的,那么你将会收到”No route to host“这样的消息,这种状态下你就需要确认你的适配器已启用,或者重新把茶以太电缆(网线)...
简介: mac ping: sendto: Host is down PING不通别人的ip,可以ping通路由器 PING 192.168.1.131 (192.168.1.131): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 Request timeout for icmp_seq 3 ping: sendto: No route to host Re...
ping默认网关或局域网上另一台主机的IP地址来测试IP的连通性。在Mac OS X上,ping命令是连续的(译者附:不使用终端命令,ping程序在默认参数下是不会停止的)。 mycomputer:/usr/bin someuser$ ping 192.168.128.1 1. 如果本地连接是同的并且目的主机也是在线上并且是可以达到的,你将会输出每个ICMP(Internet Control...
ping: sendto: No route to host Request timeout for icmp_seq 4 ping: sendto: Host is down ...
12/31/12 3:59:00.624 PM _usbmuxd: sntp sendpkt: sendto error: No route to host. Couldn't send packet! 12/31/12 3:59:00.624 PM _usbmuxd: on_wire failed for server 0.0.0.17! 12/31/12 3:59:00.624 PM sandboxd: ([80]) applepushservice(80) deny file-read-data /Library/Preference...
ping 是常用的网络管理命令，ping也属于一个通信协议，是TCP/IP协议的一部分，适用于windows和linux以及...
Route not deleted after 'setTunnelNetworkSettings:nil' We have a packettunnelprovider which we are using for intercepting IP packets. We define includeroutes while setting tunnel using 'setTunnelNetworkSettings'. But later when we want to disable packet interception, we want to do it from packet...
ip route add default via <gateway> The most concerning issue to me is that the behavior is wildly inconsistent. I'll boot up and nothing will work, reboot and things work great, reboot again and things are broken again. I've tried about every combination of settings, ...