A dab of grease on the o-ring, teflon tape on the threads, and tighten til it won't tighten anymore!The gun itself works as advertised and I don't notice any changes in performance compared to the stock wand besides being very short and easy to maneuver. There is 1 more adapter than...
- M22-14mm America standard threads. Hydraulic Hose Reinforcement Product Name One steel wire braided SAE R1AT/DIN 1SN,SAE R1AT/DIN 1ST,DIN 1SNK,DIN/EN 1SN WG,DIN 1SC,SAE R5,SAE 100R17 Two steel wire braided SAE R2AT/DIN 2...
B1.13M Metric Screw Threads B18.18.3M Inspection and Quality Assurance for Special Purpose Fasteners B18.2.3.7M Metric Heavy Hex Structural Bolts B18.24 Part Identifying Number (PIN) Code System Standard for B18 Fastener Products This specification covers t...
If threads are worn, replace. If o–ring grooves have burrs, remove the burrs with an India stone. 2. Inspect spring (7) for wear on the outside edge of the spring. Check spring ends for squareness. The spring ends must be parallel within (3_). If spring is bent or worn, replace...