三方固件: https://pvvx.github.io/ATC_MiThermometer/TelinkMiFlasher.html 先打开这个网站,如下图,如果用的chome就右击红框中的chrome复制链接,在新标签页打开,以此类推。 将下下个图中的选项设置成Enabled。 设置enabled 然后返回刚刚打开的地址https://pvvx.github.io/ATC_MiThermometer/TelinkMiFlasher.html...
How to flash the custom firmware: Download the ATC_Thermometer.bin file from thelatest releaseassets and open the Web Flasher. Connect to the Xiaomi thermometer; searching may take a while as it broadcasts not so often for better battery life. ...
Flash the latestz03mmc.binfirmware over transitional firmware to convert it to zigbee. The device should now show up in your Zigbee bridge (If joining is enabled, of course). If it doesn't, reinsert the battery and/or short the RESET and GND contacts on the board for 5 seconds. ...
To flash a new firmware via an standard USB to UART adapter, simply connect the Thermometer as seen in the pictureMi_SWS_Connection.jpgto the USB to UART converter and run the ATCtelink.py tool with the first parameter being the name of the file you want to flash. ...
The problem Hi all I have 3 Xiaomi LYWSD03MMC devices discovered by Xiaomi BLE integration but isn't showing any data. The devices are detected but bind key is not requested and only appears Signal Strength entity disabled. With this sta...