<string.h> int errno; u32_t lwip_sys_now; struct sys_timeouts { struct sys_timeo *next; }; struct timeoutlist { struct sys_timeouts timeouts; xTaskHandle pid; }; #define SYS_THREAD_MAX 4 static struct timeoutlist s_timeoutlist[SYS_THREAD_MAX]; static u16_t s_nextthread = 0; ...
1.1 基础工程 在移植之前我们需要一个基础工程,因为我们要用到内存管理,因此这里我们使用实验37内存管理实验作为基础工程,我们在这个工程的基础上完成本章的移植过程。 本章我们要使用到 USMART 组件,因此我们要在内存管理实验的工程上添加 USMART 组件,如果已经添加了的话就不用再添加了,关于 USMART 组件的使用请...
#define LWIP_PROVIDE_ERRNO 1 //帧校验和选项,STM32F4x7允许通过硬件识别和计算IP,UDP和ICMP的帧校验和 #define CHECKSUM_BY_HARDWARE //定义CHECKSUM_BY_HARDWARE,使用硬件帧校验 #ifdef CHECKSUM_BY_HARDWARE //CHECKSUM_GEN_IP==0: 硬件生成IP数据包的帧校验和 #define CHECKSUM_GEN_IP 0 //CHECKSUM_GEN_...
sock) 21 return -1; 22 23 if ((sock->flags & O_NONBLOCK) && (sock->rcvevent <= 0)) { 24 LWIP_DEBUGF(SOCKETS_DEBUG, ("lwip_accept(%d): returning EWOULDBLOCK\n", s)); 25 sock_set_errno(sock, EWOULDBLOCK); 26 return -1; 27 } 28 29 newconn = netconn_accept(sock->conn)...
1101:104 bit 1110:112 bit 1111:120 bit (8)中断状态寄存器:ISR Bit 7:数据宽度选择 0:16位模式 1:8位模式 Bit 5:连接状态改变 Bit 4:发送“underrun” Bit 3:接收计数器溢出 Bit 2:接收溢出 Bit 1:数据包发送 Bit 0:数据包接收 (9)中断状态寄存器:IMR ...
本文着重介绍Server端的accept()过程。 上一篇我们已经分析了listen()过程,listen()过程新建了pcb并把它放到了tcp_listen_pcbs这个链表里。 接下来,Client端通过Server绑定的地址和端口号(通过bind绑定),给Server发包。Server收到了Client过来的TCP包后,如何记住这个Client,并且接下来会做什么呢?这些就是这篇小文分析...
103 #define LWIP_PROVIDE_ERRNO 1 104 105 /* --- 链接回调配置 --- */ 106 /* LWIP_NETIF_LINK_CALLBACK==1: 支持来自接口的回调函数 107 * 108 */ 109 #define LWIP_NETIF_LINK_CALLBACK 0 110 /* 111 --- 112 --- 校验和配置 --- 113 --- 114 */ 115 116 /* STM32F4x7 允许...
#define LWIP_PROVIDE_ERRNO 1 /* --- link callback options --- */ /* LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface * whenever the link changes (i.e., link down) */ #define LWIP_NETIF_LINK_CALLBACK 1 /* --- --- Checksum...
- INIT:fix lwip_init failed because of dpdk set errno * Wed Jul 24 2024 yinbin <yinbin8@huawei.com> - 2.2.0-50 - LOOPBACK: fix loop coredump * Tue Jul 23 2024 LemmyHuang <huangliming5@huawei.com> - 2.2.0-49 - cleancode: refactor offload - enable sys_arch failed log ...
LWIP_SOCKET_SET_ERRNO has been removed - 'errno' is always set - and required! * httpd LWIP_HTTPD_CGI_SSI: httpd_cgi_handler() has an additional parameter "struct fs_file *" ++ Port changes: * tcpip_trycallback() was renamed to tcpip_callbackmsg_trycallback() to avoid confusion...