msg->msg.inp.input_fn = input_fn; if (sys_mbox_trypost(&mbox, msg) != ERR_OK) /* 构造消息完成,发送邮箱 */ { memp_free(MEMP_TCPIP_MSG_INPKT, msg); /* 释放内存池 */ return ERR_MEM; } return ERR_OK; #endif /* LWIP_TCPIP_CORE_LOCKING_INPUT */ } 上面的消息处理流程图如下...
err = udp_bind(pcb, &pcb->local_ip, pcb->local_port); if (err != ERR_OK) { return err; } } /* 数据包太大,无法添加UDP首部 */ if ((u16_t)(p->tot_len + UDP_HLEN) < p->tot_len) { return ERR_MEM; } /* 没有足够的空间将UDP首部添加到给定的pbuf中 */ if (pbuf_add_...
if (!lwip_netconn_is_err_msg(mem, &err)) { pbuf_free((struct pbuf *)mem);} } else #...
而参数NETCONN_MORE则指向上次发送的那个数据段,适用于连续发送数据的情况。。 *5 ERR_OK: 表示查询成功,函数正常返回。 ERR_MEM:内存错误,稍后会重试,重新查询。 ERR_ARG:DNS客户端未初始化或者没有找到合适的主机名。 ERR_VAL:DNS服务器无响应。 *6#define IP4_ADDR (ipaddr, a,b,c,d) \ (ipaddr)-...
I have a lot of error message with "ERR4N -1" so a ERR MEM but i have verified the snd_buf. I join my file "lwipopts.h". I call TCP_TMR() every 100ms with LwIP_Periodic_Handle(LocalTime); With wirehark, i see the "push ack" frame of serveur. but each frame send i ...
result = ERR_MEM; } } }returnresult; } 具体的执行流程如下: 首先调用etharp_find_entry()函数返回一个arp表项,该表项可能是pending 或stable状态,也有可能是新申请的empty状态,然后更改为pending 状态。 判断要发送的数据包是否为空,或者 ARP表项 是否为pending 状态,只要符合一个成立,就发送一个arp...
* @return ERR_OK if the ARP packet has been sent * ERR_MEM if the ARP packet couldn't be allocated * any other err_t on failure */err_tetharp_raw(structnetif *netif,conststructeth_addr *ethsrc_addr,conststructeth_addr *ethdst_addr,conststructeth_addr *hwsrc_addr,constip_addr_t...
其中SendCharBuff主要是调用tcp_write函数,这个当WM_Record_Num这个数值很大时,客户端总是接收不全,后来经过反复地进行实验发现,然来是tcp_write这个函数在循环到12次的时候会返回ERR_MEM的内存错误,这个问题让我百思不得其解,然后通过网上的一些资料,很多人说是lwip协议栈有BUG,然后我姑且相信了这个结论,但是有BUG...
2、err_t udp_send(struct udp_pcb *pcb, struct pbuf *p) 说明:发送udp包。这个函数直接调用udp_sendto()函数。 参数:pcb协议控制块;p数据包发送缓存区。 返回:ERR_OK发送成功;ERR_MEM发送溢出;ERR_RTE不能发送到指定ip;其它表示发送失败。 3、err_t udp_sendto(struct udp_pcb *pcb, struct pbuf *p...
else if(wr_err == ERR_MEM){ es->p_tx = ptr;} tcp_output(tpcb);} } 其实和原子例程一模...