We have to refer to the Table 7.1.7.1-1 and Table 7.1.7.2.1-1 from 3GPP 36.213 Lets assume that eNB assigns MCS index 20 and 2 resource blocks (RBs) on the basis of CQI and other information for downlink transmission on PDSCH. Now the value of TBS index is 18 as seen in Table ...
旧式MCS表可与最高达第一阶数的正交振幅调制(QAM)相关联,并且非旧式MCS表可与最高达第二阶数的QAM相关联,第二阶数高于第一阶数. Legacy MCS table with up to first order quadrature amplitude modulation (QAM) is associated and non-legacy MCS table with up to the second order of the QAM associated ...
MCS是Modulation and Coding Scheme的缩写,称为调制编码策略,如下表(TS 36.213 Table 7.1.7.1) 。后续将通过MCS来确定物理资源,调整调制阶数。 3、确定MCS后,继续查上表,得到一个对应的TBS Index值,范围也是0~26。TBS Index看名字就知道是用来找TBS的,那TBS是什么鬼?TBS,Transport Block Size,顾名思义是传输...
Use lteMCS to look up the modulation and coding scheme (MCS) information as defined by MCS index mapping to modulation and TBS index tables in TS 36.213 [1] Table 7.1.7.1-1, Table 7.1.7.1-1A, and Table 8.6.1-1. [itbs,mod,rv]=lteMCS() returns the physical downlink shared channel ...
Use lteMCS to look up the modulation and coding scheme (MCS) information as defined by MCS index mapping to modulation and TBS index tables in TS 36.213 [1] Table 7.1.7.1-1, Table 7.1.7.1-1A, and Table 8.6.1-1. [itbs,mod,rv]=lteMCS() returns the physical downlink shared channel ...
当配置时,UE将使用由除1A和1C以外的DCI格式的C-RNTI或SPS-C-RNTI加扰的CRC来监视下行DCI分配,以使用新引入的MCS表和TBS索引来支持1024QAM。新的CQI表也引入了支持1024QAM。这允许配置的UE以1024QAM支持的频谱效率反馈CQI。此外,每个频带/频带组合报告支持1024QAM的UE能力。 表1.PDSCH调制和TBS索引(table3) ...
基站根据终端反馈的CQI和预测算法,选择数据传输的MCS,见表2.2.2.-2。 对于空间复用,UE需要确定一个RI值,对应有效的传输层数。对于发射分集,RI等于一。 表2.2.2-2:4-bitCQITable 2.2.3上行功率控制 上行功率控制用来控制不同上行物理信道的发射功率。这些物理信道包括物理上行共享信道(PUSCH)、物理上行控制信道(...
FDL=FDL_low+0.1(NDL–NOffs-DL) FDL=1805+0.1*(1750-1200)=1860M是下行的中心频 点。 NDL=10*(FDL–FDL_low)+NOffs-DL 3 FDL:中心频率 Table 5.7.3-1: E-UTRA channel numbers 百度搜索“就爱阅读”,专业资料,生活学习,尽在就爱阅读网 92to,您的在线图书馆...
NB不定遵循UE上报的信道状态,UE上报的只是建议传输阶数和预编码矩阵,以及NB的最MCS。但是NB可以重新选择自己i的传输参数。 因为NB做决策时需要更多的信息,和其他UE的信息。 CQI与MCS CQI是在建议的RI和PMI,且PDSCH传输的BLER最高为10%情况下,使用最高的MCS。以下是协议中给出的表格。
256QAM-perCC-Info-r14参数为supported时,则对 应的载波成员支持上行256QAM.UL-256QAM-perCC-Info-r14参 数的数目等于载波聚合的载波成员数 适用于所有的载波聚合频段 支持解析 RRC 信令 enable256QAM-r14 进行 256QAM 的 可选 MCS table切换 7.3.5 VoLTE/ViLTE 优先接入 VoLTE/ViLTE优先接入应满足表21要求....