4. 将sas3flash.efi和SAS9300_8i_IT.bin、mptsas3.rom、mpt3x64.rom共4个文件复制到U盘根目录。 最终U盘目录结构如下: (三)刷新固件 开始前,建议把阵列卡背面的3个标签拍下照,后面会用到上面的信息。 1. 将阵列卡插入主板PCI-E插槽。X8或X16均可,制作好的U盘也插好。 2. 开机,进入启动选项(具体按键...
Firmware Flash Successful. Resetting Adapter... Adapter Successfully Reset. NVDATA Version 0e.01.00.0b Finished Processing Commands Successfully. Exiting SAS3Flash. 9.5.4 物理盘定位 点亮或熄灭指定物理盘的指示灯。 【命令】 ssas3ircu controller_id locate enclosure_id:slot_id operation 【参数】 contr...
LSI 9300 16i. The firmware was successful, but this did not solve the problem of the copy speed falling from 120MBsec to 5MBsec over the network to a RAIDZ-2 pool of hard drives. Unfortunately. jgreco Resident Grinch Joined May 29, 2011 Messages 18,680 May 24, 2023 #2 [-- Mod...
If you are using an LSI 9300 HBA with FreeNAS or the soon-to-be TrueNAS CORE, you may experience some performance issues causing the controller to reset when using SATA HDDs. After working with Broadcom, we’ve come up with a firmware update that is not available on their website that ...
Im living up to my username and was updating my LSI 9300-16i as the one controller had a really old EFI BIOS. I have no idea how I did it, but I updated it perfectly fine with the latest bios but with the wrong firmware... I did a SAS9300_8e_IT by accident. So I tried ...
在RAID1/RAID1E/RAID10中,LSI SAS3008的FW默认把硬盘的写Cache关闭。在RAID0中,硬盘写Cache默认打开。 同一RAID组中需要使用同类型同规格的硬盘。 7.2.5 一致性检查 针对有冗余功能的RAID(RAID 1\10\1E),可以实现手动对RAID内的硬盘进行数据的一致性检查,如果发现有数据不一致的情况,会尝试做自动修复并将错误...
在RAID1/RAID1E/RAID10中,LSI SAS3008的FW默认把硬盘的写Cache关闭。在RAID0中,硬盘写Cache默认打开。 同一RAID组中需要使用同类型同规格的硬盘。 7.2.5 一致性检查 针对有冗余功能的RAID(RAID 1\10\1E),可以实现手动对RAID内的硬盘进行数据的一致性检查,如果发现有数据不一致的情况,会尝试做自动修复并将错误...
MPT Firmware Revision 3008卡MPT固件版本。 SAS Address 3008卡的SAS地址。 NVDATA Version 3008卡的配置文件版本。 Status 3008卡当前的状态。 Boot Order 存在多个RAID卡时的启动顺序。当只有1个RAID卡时,此参数为“0”。 Boot Support 是否支持启动。 Enabled BIOS & OS:支持在BIOS和OS管理RAID卡。 Enabled BI...
For Dell variants of the 9211-8i, the A10 9211-8e firmware is known to work well as an IT firmware to flash in this step, as explained and linked above. The filename within the download is 6GBPSAS.FW. Confusingly, Dell also use the same filename for their ...
I use a LSI 9300-8i HBA in my proxmox. How could I active SRIOV on this one? I update already the firmware but under PCI devices the HBA is only listed one time. All features needed are already activated in bios (using vGPU). thanks for the help. It works on VMWare (https://...