In the System-> Reboot / Reset interface, users can can restart or reset the gateway. ETH LED will SOLID BULE Until the restore is finished. When the gateway restores the factory settings is complete, The WiFi configuration will enable WiFi Access Point by default. ...
3. Reboot the device and run logread -f to verify if GPS already works. Fri Mar 6 04:08:59 2020 daemon.info lora_pkt_fwd[3016]:INFO~ GPS serial port path is configured to "/dev/ttyUSB1" Fri Mar 6 04:08:59 2020 daemon.info lora_pkt_fwd[3016]: INFO~ [main] TTY port /dev/...
Like all module options, you need to create (as root) a file /etc/modules.d/50-rtw88.conf. In this file, add a single line that says "options rtw88_core disable_lps_deep=y" and reboot. I tried that and sadly i get the exact same issue, no change on dmesg either ...
To that end, if you try to use the ProRes feature with a slower SSD, you might find that while it will initially work, the heat buildup will cause thermal throttling, and then the video and device will slow down, inevitably causing the phone to jam up and probably require a reboot. ...