8. Retighten the hex cap to approximately 75 pound-inch in torque. 9. Turn on sample flow by turning the inlet valve left. 10. Check for leaks. Replacement of the DIPA Reagent and Diffusion Tubing Assembly Warning: Replacement of DIPA reagent is dependent on operating conditions and usage....
WARNING THE HEATER IS NOT INTENDED FOR OPERATION AT HIGHER THAN 14.0" W.C.- NATURAL GAS, (1/2 POUND PER SQUARE INCH GAGE) SUPPLY GAS PRESSURE. EXPOSURE TO HIGHER SUPPLY PRESSURE MAY CAUSE DAMAGE TO THE GAS VALVE WHICH COULD RESULT IN FIRE OR EXPLOSION. IF OVERPRESSURE HAS OCCURRED SUCH ...