Pistorius: Minimisation of calcium additions to low carbon steel grades. Ironmaking and Steelmaking, Vol. 27 (2000), No. 6, 442–449J.M.A. Geldenhuis and P.C. Pistorius, Minimisation of calcium additions to low carbon steel grades, Ironmaking Steelmaking , 27(2000), p.442....
Medium carbon steels have good machining characteristics, and one of the more popular grades used in machined steel product is AISI 1045. AISI 1045 can also be hardened by heating the material too approximately 820-850C (1508 -1562 F) and held until the material reaches a uniform temperature....
a2.1.2 All carbon and low temperature carbon steel grades of pipe material shall have a maximum carbon content of 0.25% and a maximum carbon equivalent of 0.45 based on the following formula: 2.1.2 管子材料所有碳和低温碳钢等级将有一种最大含炭成分0.25%和根据以下惯例的最大相当碳量0.45 : [...
Materials » Alloys » Steel » Carbon Steel » ASTM A442 Grade 55 Materials » Alloys » Steel » Carbon Steel » ASTM A414 Grade D Materials » Alloys » Steel » Carbon Steel » ASTM A109 Temper 2 FREE Publications...
For a number of steel grades (e. g. deep drawing and electrical steels) the relevant properties are explicitly dependent on the crystallographic anisotropy. It is self-evident that for these steels the precise control of texture development in the subsequent stages of the manufacturing process is ...
This paper reports the results of experimental work on these steels, and compares them with the properties of conventional steel. On thinner sections, it was found that the properties of the experimental steels compare favourably with those of conventional grades. 展开 ...
invention relates to rolling production and can be used in production of cold rolled band with thickness 0.8-0.9 mm, with high solidity (σ<Sub>B</Sub> not less than 780 H/mm<Sup>2</Sup>) and plastic properties (δ<Sub>100</Sub>-1-5%) from low carbon grades of steel which is us...
COLD DRAWN SEAMLESS STEEL TUBE Standards Steel Grades Size Range DIN 2391 ST35/45/52 OD2 - 60mm × WT0.3 -10mm 1629 ST37/44/52 OD2 - 60mm × WT0.3 -10mm 1630 ST37.4/44.4/52.4 OD2 - 60mm × WT0.3 -10mm 2445 ST35/ST52/ST37.4//52.4 OD2 - 60...
In this work, the application of the Quenching and Partitioning (Q&P) process to two low-carbon steels has led to the development of a new kind of steel microstructure formed by laths of martensite separated by films of intercritical ferrite and retained austenite. The chemical compositions of ...
Low, Medium & High Carbon Steel Strips GradesC10 / SAE 1010C20 / SAE 1020C40 / EN8C45 / S45CC50C55 / EN9C60C62C65C70C75C80 / EN42JC95C98 / EN44DSK4SK5 / SK8550CrV4 / SUP10 / EN47 Thickness Range0.10 - 6.00 MM Width Range5.00 - 1250 MM ...