03-Spanning Tree Configuration 04-Ethernet Link Aggregation Configuration 05-Port Isolation Configuration 06-QinQ Configuration 07-VLAN Mapping Configuration 08-BPDU Tunneling Configuration 09-GVRP Configuration
switchxxxxxx(config-if)#loopback-detection enable loopback-detection interval To set the time interval between LBD packets, use theloopback-detection intervalGlobal Configuration mode command. To restore the default configuration, use thenoform of this command. Syntax loop...
switchxxxxxx(config-if)#loopback-detection enable loopback-detection interval To set the time interval between LBD packets, use theloopback-detection intervalGlobal Configuration mode command. To restore the default configuration, use thenoform of this command. Syntax loopback-detection intervals...
Loopback detection frames are constructed in the form of TLV (type/length/value) triplets.Table 1lists the required and optional TLVs supported by the loopback detection mechanism. Table 1TLVs supported by the loopback detection mechanism