x L: 25 x 50 mm Temperature range: -40 ... +105 °C Capacitance tolerance: ±20% Pitch: 10 mm Capacitance: 270 μF Rated voltage: 450 VDC 搜索查看资料 EETEE2G271JJ[更多] Panasonic Electronic Components Capacitor, snap-in Dimensions ? x L: 25 x 40 mm Temperature range: -40 .....
Working temperature °C range -54~150 -54~150 -54~150 -54~150 -54~150 -54~150 -54~150 -54~150 Density(g/cm2) 1.05 1.05 1.1 1.07 1.08 1.1 1.1 1.1 Packing 6ml bottle blister card,144pcs/carton 10ml bottle blister card,144pcs/carton 50ml ...
crosslinking, i.e., the crosslink density, can be determined by a variety of methods, such as dynamic mechanical thermal analysis (DMA) using a TA Instruments DMA 2980 DMA analyzer over a temperature range of −65° F. (−18° C.) to 350° F. (177° C.) conducted under ...
The maleimide component should be present in the composition in an amount within the range of from about 5% to about 20%, based on the total weight of the composition. The compositions may also include a diluent component reactive at elevated temperature conditions. Reactive diluents include those...
The pin and collar (P & C) test of the viscosity and weight test were all used to judge the storage characteristics of the containers, by testing the performance of the anaerobic product which was heat aged or stored at room temperature (22° C. in the container). A series of ...
The gasket should operate over a temperature range from -40° C. to +150° C. It should withstand oil pressure of 90 p.s.i. at 150° C. and an oil/petrol (gasoline) mix pressure of 90 p.s.i. at 120° C. It should a
RT=Room temperature RH=Relative humidity DBP=dibutyl phthalate Example 1 Adhesives Were Prepared as Follows: A. 11-Butyl cyanoacrylate. B. n-Butyl cyanoacrylate containing 30% dibutyl phthalate plasticizer. C. Ethyl cyanoacrylate. D. Ethyl cyanoacrylate containing 30% dibutyl phthalate plasticizer. ...
dry THF was added 2.13 g (0.03 mole) pyrrolidine and 3.03 g (0.03 mole) triethylamine at RT (room temperature); a white solid formed. The reaction mixture was stirred at RT for 24 hours, then all volatiles were removed and the entire was poured into water to give a white precipitate ...
3988299Anaerobic adhesive composition having improved strength at elevated temperature consisting of unsaturated diacrylate monomer and maleimide additive1976-10-26Malofsky526/262 3218305Accelerated anaerobic compositions and method of using same1965-11-16Krieble260/89.5 ...
was allowed to stir at room temperature for 20 hrs. At this time, the viscosity of the solution had increased considerably. The solution was diluted with chlorobenzene (15 mL) and poured into a large excess of methanol (150 mL) to precipitate the copolymer and wash away any unreacted ...