策略路由,可以理解为按策略选择不同的路由表。策略可以按源IP,流入的网卡接口(interface),端口,netfilter做的mark标记等其他网络要素筛选流量。 比如设备有多个出口网卡(带宽,费用,网络质量不同),可以用策略路由把不同的流量分配到不同的路由表,这些路由表中的默认路由分别指向不同的出口,那么不同的流量就走到不同...
Contributor pelwell commented Aug 15, 2022 xfrm_user doesn't exist as a module because it is built-in (surprisingly). However, CONFIG_XFRM_INTERFACE is not enabled. Please obtain a complete list of settings that are required on Raspberry Pis and we'll consider adding them. Author samip5 ...
[XFRM_MSG_EXPIRE - XFRM_MSG_BASE] = { .doit = xfrm_add_sa_expire }, [XFRM_MSG_UPDPOLICY - XFRM_MSG_BASE] = { .doit = xfrm_add_policy }, [XFRM_MSG_UPDSA - XFRM_MSG_BASE] = { .doit = xfrm_add_sa }, [XFRM_MSG_POLEXPIRE - XFRM_MSG_BASE] = { .doit = xfrm_add_pol_...
[XFRM_MSG_UPDPOLICY - XFRM_MSG_BASE] = { .doit = xfrm_add_policy }, [XFRM_MSG_UPDSA - XFRM_MSG_BASE] = { .doit = xfrm_add_sa }, [XFRM_MSG_POLEXPIRE - XFRM_MSG_BASE] = { .doit = xfrm_add_pol_expire}, [XFRM_MSG_FLUSHSA - XFRM_MSG_BASE] = { .doit = xfrm_flush_sa...
/*接口标志(下面详述)这个 flags 成员是一个位掩码, 包括下面的位值. IFF_ 前缀代表 "interfaceflags". 有些标志由内核管理, 有些由接口在初始化时设置来表明接口的能力和其他特性. 有效的标志, 对应于 <linux/if.h>(详情见/linux内核驱动/网络接口标志*/ ...
if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) //ipset安全检测 goto drop; nf_reset(skb); /* No socket. Drop packet silently, if checksum is wrong */ if (udp_lib_checksum_complete(skb)) //没有socket,如果checksum出错则直接丢弃 ...
Device interface for IPMI 为IPMI消息处理器提供一个IOCTL接口已便用户空间的进程也可以使用IPMI IPMI System Interface handler 向系统提供接口(KCS,SMIC),一般你用了IPMI就需要选上 IPMI Watchdog Timer 启用IPMI Watchdog定时器 IPMI Poweroff 允许IPMI消息处理器关闭机器 Watchdog Cards 能让系统在出现致命故障后自...
xfrm_state结构体生成 该结构体生成位于xfrm_add_sa函数中,在[1]处对用户输入数据进行参数及协议检查,在[2]处对根据用户输入对结构体进行构造,并放入SA结构体的哈希链表中 static int xfrm_add_sa(struct sk_buff *skb, struct nlmsghdr *nlh, struct nlattr **attrs) ...
[ 1.803240] usbcore: registered new interface driver usbhid[ 1.810408] usbhid: USB HID core driver[ 1.820373] Initializing XFRM netlink socket[ 1.826711] NET: Registered protocol family 17[ 1.833034] Indeed it is in host mode hprt0 = 00021501[ 1.901026] Key type dns_resolver registered[ ...
xfrm_user 24576 3 “` 从输出结果中我们可以看到已加载的模块名和模块大小等信息。 2. lspci:该命令用于显示当前系统的PCI设备信息。执行命令`lspci`后,会列出当前系统中所有PCI设备的详细信息,包括设备名称、供应商信息、设备ID等。 示例命令和输出结果: ...