staticvoid*Excute(void*args){pthread_detach(pthread_self());// 为了让主线程不等待ThreadData*td=static_cast<ThreadData*>(args);td->_self->_service(td->_sockfd,td->_addr);::close(td->_sockfd);deletetd;returnnullptr;} 代码语言:javascript 代码运行次数:0 运行 AI代码解释 using command_servi...
ifconfig— View or modify the configuration of network interfaces. netstat— Print information about network connections, routing tables, interface statistics, masquerade connections, and multicast memberships. route— Display and manipulate the IP routing table. ...
sudo ip link set eth0 mtu 1500 # 设置MTU值 sudo ip link set eth0 name eth1 # 重命名接口(需先禁用) sudo ip link set eth0 address 00:11:22:33:44:55 # 修改MAC地址 1. 2. 3. 三、路由管理:ip route 查看路由表 ip route show # 显示主路由表 ip route show table local # 查看local...
You can delete or remote an IPv4/IPv6 address one-by-one asdescribed above. However, the flush command can remove as flush the IP address as per given condition. For example, you can delete all the IP addresses from the private network 192.168.2.0/24 using the following command: 1 ip-s...
ifconfig:Older command for configuring IP network interfaces. Still included but deprecated. ip addr:Configure IP addresses assigned to interfaces, including adding/removing addresses. ip route:View and modify IP routing tables, add static routes, set default gateways. ...
BOOTPROTO=static NAME=enp0s3 DEVICE=enp0s3 ONBOOT=yes IPADDR=192.168.56.100 NETMASK=255.255.255.0 查看IP 地址 使用ip 命令显示设备和地址信息: 显示接口的统计信息 ip 命令可以用于显示关于网络性能的统计信息 RX 表示接受的数据包信息 TX 表示传送的数据包信息 ...
Step 1: Obtain the IP address and gateway of the Linux ECS instance Log on to the Linux ECS instance for which you want to configure a static IP address. Run the following command to query the IP address and subnet mask of the Linux ECS instance: ifconfig A command output similar to...
设置ip地址打开终端,取得root权限(sudo su)。...查看已安装网卡 192.168.0.20 — 预设置的IP值。...netmask 255.255.255.0 — 子网掩码 2.设置默认网关打开终端,取得root权限(sudo su),输入命令: # route add default gw 192...
Command:进程启动的启动命令名称,如果这一行显示不下,进程会有一个完整的命令行。 top命令使用过程中,还可以使用一些交互的命令来完成其它参数的功能。这些命令是通过快捷键启动的。 <空格>:立刻刷新。 P:根据CPU使用大小进行排序。 T:根据时间、累计时间排序。 q:退出top命令。
为接口设置静态IP地址(临时生效,重启后失效): sudo ifconfig eth0 192.168.1.100 netmask 255.255.255.0 1. 4.3 设置MTU(最大传输单元) 调整MTU以优化网络性能(例如VPN或特定网络环境): sudo ifconfig eth0 mtu 1500 1. 4.4 监控网络流量 通过观察RX(接收)和TX(发送)的统计信息,可以实时监控网络流量: ...