y #将文件拷贝过来覆盖 [root@localhost dhcp]#vim dhcpd.conf #修改配置文件 #第8行 修改默认的全局dns地址 8 option domain-name-servers 8.8.8.8; #直接修改27 行 27 subnet 192.168.100.0 netmask 255.255.255.0 { 28 range 192.168.100.128 192.168.100.200; 29 option routers 192.168.100.1; 30 option ...
1、在/etc/sysconfig/network/if-up.d新建change-nvmeof-vlan-egress.sh,内容如下: #!/bin/sh action=$1 interface=$2 logger "$0: Action: $action, interface: $interface." if [ "x$action" == "xpre-up" ]; then logger "$0: Set $interface EGRESS priority mappings 0:3 1:3 2:3 3:3...
You can tell NetworkManager to disregard an interface by using plugins. If you’re using the ifupdown plugin (for example, in Ubuntu and Debian), add the interface configuration to your /etc/network/interfaces file and then set the value of managed to false in the ifupdown section of the ...
your bytes leave the application layer on Host A and travel through the transport and network layers on Host A; then they go down to the physical medium, across the medium, and up again through the various lower levels to the application layer on Host B in much the same way. If...
iface eth0 inet dhcp pre-up [ -f /etc/local-network-ok ] 第3行会在激活eth0之前检查/etc/local-network-ok文件是否存在,如果不存在,则不会激活eth0。 更进一步的配置格式 auto eth0 eth1 iface eth0 inetstaticaddress192.168.42.1netmask255.255.255.0pre-up /path/to/check-mac-address.sh eth011:...
ifup [interface] 关闭网卡 ifdown [interface] 2、命令介绍 ifup 与 ifdown 其实都是 shell 脚本,他会直接到/etc/sysconfig/network-scripts目录下查找对应的配置文件,例如ifup eth0会读取ifcfg-eth0这个文件的内容,然后加以设置。 不过,由于这两个脚本主要是通过读取配置文件 (ifcfg-eth*) 来启动与关闭网络接口,...
PEERDNS={yes|no}:是否在BOOTROTO为dhcp时接受由DHCP服务器指定的DNS地址 如:我们配置下eth1的接口的信息,使用vim /etc/sysconfig/network-scripts/ifcfg-eth1编辑该文件,并输入如下信息 DEVICE=eth1 BOOTPROTO=static IPADDR=172.16.200.222 NETMASK=255.255.0.0 ...
使用nmcli创建一个新连接。使用DHCP方式自动获取ip 地址,网关和DNS. [root@test-server ~]# nmcli connection add con-name yu type ethernet ifname ens33连接"ens33"(96629896-a1b7-4767-a41b-f9255fd86d11)已成功添加。 使用nmcli查看新连接获得ip 地址,网关和DNS。
动态配置(IP/Netmask): DHCP服务器(Dynamic Host Configuration Protocol) 静态指定: 用户空间工具(ifconfig,ip命令),立即生效,但不会长久有效(地址配置在内核,显示在用户空间) 网络设备服务配置文件,完成长久有效配置: /etc/sysconfig/network-script/ifcfg-eth0 GUI/...
PEERDNS:如果BOOTPROTO的值为dhcp ,是否允许dhcp server分配的DNS服务指向信息直接覆盖至/etc/resolv.conf文件中。 2.路由配置文件: /etc/sysconfig/network-scripts/route-IFACE,这编写路由规则时有两种方法: (1)TARGET via GW:如: 192.168.1.6 via 172.16.0.1 (2)每三行定义一条路由 ADDRESS#=TARGET NETMASK#=...