[Unit] Description=Load Kernel Modules [Service] Type=oneshot ExecStart=/path/to/load_modules.sh [Install] WantedBy=multi-user.target 然后启用并启动该服务: bash sudo cp load_modules.service /etc/systemd/system/ sudo systemctl daemon-reload sudo systemctl enable load_modules.service sudo system...
通常,数据采集卡的驱动是以内核模块(kernel module)的形式提供的。可以手动将模块配置为开机自动加载: - 查看模块是否已加载:使用 `lsmod` 命令查看是否已加载相关模块。 lsmod | grep <模块名> - 手动加载模块:如果模块未加载,可以用 `modprobe` 命令手动加载。 sudo modprobe <模块名> - 开机自动加载模块: 将...
现在来思考一种情况,假设你的 linux 是安装在 SATA 磁盘上面的,你可以通过 BIOS 的 INT 13 取得 boot loader 与 kernel 文件来开机,然后 kernel 会开始接管系统并且侦测硬件及尝试挂载根目录来取得额外的驱动程序。 问题是,核心根本不认识 SATA 磁盘,所以需要载入 SATA 磁盘的驱动程序, 否则根本就无法挂载...
systemctl reload multipathd.service 配置多路径随系统启动 多路径配置完成后,可以将其配置成随系统启动,执行下面的命令进行配置: systemctl enable multipathd.service配置检查 配置完成后执行multipath -ll命令来确认配置是否生效,举例如下: [root@localhost dev]# multipath -ll mpathe (eui.710037421701f65216212c220...
echo"OK"elseecho"FAIL"fireturn"$status"}case"$1"instart|stop|restart|reload)"$1";;*) echo"Usage: $0 {start|stop|restart|reload}"exit1esac 6 bluetoothctl bluetoothctl是 Linux 系统中用于控制蓝牙设备的一个交互式命令行工具。 以下是bluetoothctl的一些关键特性和用途: ...
(skb);//调用该函数,将路由信息缓存到_skb->refdst /* must reload iph, skb->head might have changed */ //重新取ip头 iph = ip_hdr(skb); } } //通常从外界接收的数据包,skb->dst不会包含路由信息 //skb->dst该数据域包含了如何到达目的地址的路由信息,如果该数据域是NULL, //就通过路由子...
modeprove [-lcfr] module_name -c :列出目前系统所有的模块 -l :列出目前在/lib/modules/`uname -r`/kernel当中的所有模块完整文件名 -f:强制加载该模块 -r:类似rmmod 就是删除某个模块 相关阅读:Linux常用基本命令 文件名--test mkdir test 创建一个文件夹 mkdir test/test1/test2 -p 在创建test1时候,...
This chapter is a basic tour of the kernel-provided device infrastructure in a functioning Linux system. 本章是对Linux系统中内核提供的设备基础架构的基本介绍。 Throughout the history of Linux, there have been many changes to how the kernel presents devices to the user. We’ll begin by looking...
在我顿悟后,进入 bios,果然发现快速启动下的sata support设置成仅最后一次加载的 SATA 设备。改成所有 sata 设备后,Grub2 正常引导 Windows Boot Manager。 这个问题跟哪个系统没关系,只是因为我的 Windows 装在 sata 接口的固态里。而 Rocky 装在 NVMe 的固态里。
github.io]-[~]└─$ systemctl daemon-reload ┌──[root@liruilongs.github.io]-[~]└─$ systemctl start md5sum.service ┌──[root@liruilongs.github.io]-[~]└─$ top top - 19:12:14 up 9:44, 1 user, load average: 0.29, 0.20, 0.11 Tasks: 159 total, 2 running, 157 sleeping...