pool 1.ubuntu.pool.ntp.org iburst pool 2.ubuntu.pool.ntp.org iburst pool 3.ubuntu.pool.ntp.org iburst # Use Ubuntu’s ntp server as a fallback. pool ntp.ubuntu.com # Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for # detls. The web page # might a...
# /etc/ntp.conf, configuration for ntpd driftfile /var/lib/ntp/ntp.drift server 0.pool.ntp.org server 1.pool.ntp.org server 2.pool.ntp.org server 3.pool.ntp.org “` 其中,“driftfile”指定了一个文件来记录NTP客户端的时钟漂移。NTP客户端在与服务器通信时会使用该文件来对本地时钟进行调整。...
server 3.rhel.pool.ntp.org 关于ntp.conf and step-tickers区别: step-tickers is used by ntpdate where as ntp.conf is the configuration file for the ntpd daemon. ntpdate is initially run to set the clock before ntpd to make sure time is within 1000 sec. ntp will not run if the time ...
server172.16.1.200iburst minpoll 6 maxpoll 6:设置ntp服务器地址。 logfile/var/log/ntp.log: 设置ntp日志文件路径,也可以不设置,仅是调试时使用。 配置完成后,参考如下: root@AM437x-Droidsurg:~# cat /etc/ntp.conf # Thisisthe most basic ntp configuration file # The driftfile must remainina place...
NTP server response packet: /* NTP header: 16 bytes */ 1C 02 04 EC 00 00 00 29 00 00 07 AF CA 70 01 22 /* Reference Timestamp */ CA 10 E5 43 4D FA C7 59 /* Originate Timestamp */ CA 10 E7 F9 00 10 62 4D /* Receive Timestamp */ ...
在左侧导航栏中选择Server Management——Date/time Configuration 在Manage Time Servers——Time server中填入Linux NTP Server的IP地址,点击Add,完成后此IP会显示在Added Servers中。 然后点击Set Date and Time中的Start ntpd即可启用。 NTP—配置说明(ntp.conf设置) 一、NTP服务的设置 1.NTP软件包的结构 NTP服务...
A: 配置/etc/ntp.conf NTP Server的主要配置文件为/etc/ntp.conf ,没有修改过的ntp.conf文件内容如下所示,配置选项都有相关注释信息(Linux 版本为Red Hat Enterprise Linux Server release 6.6 ) [root@localhost ~]# more /etc/ntp.conf 1. # For more information about this file, see the man pages ...
step-tickers is used by ntpdate where as ntp.conf is the configuration file for the ntpd daemon. ntpdate is initially run to set the clock before ntpd to make sure time is within 1000 sec. ntp will not run if the time difference between the server and client by more then 1000 sec (...
server 192.168.1.233 #添加此行 # --- NTP MULTICASTCLIENT --- #multicastclient # listen on default 224.0.1.1 # restrict 224.0.1.1 mask 255.255.255.255 nomodify notrap # restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap restrict 192.168.1.233 #添加此行 # --- GENERAL CONFIGURATION ---...