最小化安装的话是没有ifconfig命令的需要使用yum search ifconfig查找,然后yum install net-tools.x86_64软件包 Linux网络配置文件 /etc/sysconfig/network-scripts/ifcfg-eth0 在Linux系统中,系统网络设备的配置文件保存在/etc/sysconfig/network-scripts目录下,其中文件ifcfg-eth0包含第一块网卡的配置信息,文件ifcfg-...
Rocky linux network config Rocky linux 的默认网络配置文件不再是/etc/sysconfig/network-scripts/目录内的cfg配置文件,而是在下面目录下的配置文件 /etc/NetworkManager/system-connections/ 重新加载配置文件 # nmcli connection load /etc/NetworkManager/system-connections/ens160.nmconnection 激活配置文件 # nmcli co...
Linux 为配置网络提供了许多工具 , 其中有图形界面的 ( 如NetworkManager1)、也有伪图形界面(如 system-config-network 2)的。虽然使用这些工具来配置网络会很方便,但是由于各个发行版本的 Linux 所提供的网络配置工具很可能完全不同,并且通过命令行界面的远程登录也无法使用这些图形界面的工具,所以我们并不打算使用工具...
Linux 为配置网络提供了许多工具 , 其中有图形界面的 ( 如NetworkManager1)、也有伪图形界面(如 system-config-network 2)的。虽然使用这些工具来配置网络会很方便,但是由于各个发行版本的 Linux 所提供的网络配置工具很可能完全不同,并且通过命令行界面的远程登录也无法使用这些图形界面的工具,所以我们并不打算使用工具...
Before getting into the theory of network layers, take a look at the simple network shown in Figure 9-1. 在了解网络层理论之前,请先看一下图 9-1 所示的简单网络。 Figure 9-1. A typical local area network with a router that provides Internet access Figure 9-1. A typical local area netwo...
二、ifconfig常用命令 三、route常用命令 四、ip命常用命令 五、其他 一、网络服务、配置文件 修改网络服务配置文件不会立即生效,重启网络服务或主机后生效且永久有效 1、配置文件 1.1、网络配置文件:/etc/sysconfig/network [root@TESTHOST ~]# cat /etc/sysconfig/network ...
A host on the internal private network wants to make a connection to the outside world, so it sends its connection request packets through the router. The router intercepts the connection request packet rather than passing it out to the Internet (where it would get lost because the public Int...
在Host Name( or IP address) 下面的框中输入你要登录的远程服务器IP(可以通过ifconfig命令查看服务器ip),然后回车。此时,提示我们输入要登录的用户名。输入root 然后回车,再输入密码,就能登录到远程的linux系统了。使用密钥认证机制远程登录linuxSSH 为 Secure Shell 的缩写,由 IETF 的网络工作小组(Network Working...
ifconfig: ifcofnig IFACE_ALIAS ip: ip addr add 配置文件: ifcfg-IFACE_ALIAS DEVICE=IFACE_ALIAS 注意:网关别名不能使用dhcp协议引导。 Linux网络属性配置的tui(text user interface) system-config-network-tui 也可以使用setup找到 [root@Daniel ~]# setup ...
在/etc/sysconfig/network-scripts/目录下的-- ifcfg-eth0:第1块以太网的配置文件--ifcfg-eth1:第2块以太网的配置文件...配置例子:修改完之后需要重启网络:service network restart禁用,启用网络接口:禁用:ifdown eth0(注意,eth0是你的网络接口卡的名字,个人的还需使用ifconfig进行查看.)启用:ifup eth0修改mac...