遇到“mount.nfs: Protocol not supported”的错误时，通常会从两个方向寻找解决方法。首先，可能是因为内核不支持NFS，需要调整内核配置来支持。其次，busy box中的mount工具可能需要额外配置以支持NFS。然而，这并不是所有情况下的原因。网络不稳定或是配置问题也可能导致此错误。在实际操作中，遇到的情况...
1.内核不支持NFS,需要配置内核支持. 2.busy box的mount需要支持NFS. 其实还有一个原因是网络不稳定,或网络配置有问题, 我遇到的情况: [root@software ~]# mount -t nfs -o ro 192.168.30.9:/vx/software /share/software 报错:mount.nfs: Protocol not supported 起正在的原因是: UUID=02666766-9664-46e4...
报错:mount.nfs: Protocol not supported IP的配置文件:/etc/sysconfig/network-scripts/ifcfg-p1p1,配置不正确引起的。 还可以尝试: mount -t nfs1 -o ro 192.168.30.9:/vx/software /share/software mount -t nfs2 -o ro 192.168.30.9:/vx/software /share/software mount -t nfs3 -o ro 192.168.30.9...
mount.nfs: requested NFS version or transport protocol is not supported 主机没有安装NFS服务,需要使用如下命令安装NFS服务端软件: 安装nfsserver sudo aptinstallnfs-kernel-server 问题2 sudo mount -t nfs jetson_nano:/home/jetson/Pictures /home/lyn/jetson_nano/nfs_dir/ mount.nfs: access denied by s...
Linux NFS常见问题 问题现象(一): PTL1B:~ # mount -t nfs -o soft,intr,timeo=5 10.120.91.146:/share /home/share mount.nfs: requested NFS version or transport protocol is not supported 解决办法: 安装nfsserver 1、下载附件 2、上传两个RPM包到目标单板的任意目录...
If you have encountered issues like mount.nfs: requested NFS version or transport protocol is not supported OR mount.nfs4: Protocol not supported To resolve this Mount with NFS version 3 (with 4 verbose flags) % mount -vvvv -t nfs -o vers=3 nfs-server:/s
mount.nfs: requested NFS version or transport protocol is not supported 主机没有安装NFS服务,需要使用如下命令安装NFS服务端软件: 安装nfsserver sudo apt install nfs-kernel-server 问题2 sudo mount -t nfs jetson_nano:/home/jetson/Pictures /home/lyn/jetson_nano/nfs_dir/ mount.nfs: access denied by...
[ NFSMount_Global_Options ] # This statically named section defines global mount # options that can be applied on all NFS mount. # # Protocol Version [2,3,4] # This defines the default protocol version which will # be used to start the negotiation with the server. ...
mount -t nfs 10.0.1.1:/home/server /home/client umount -a 取消所有挂载 umount /home/client //取消挂载 umount, 老是提示:device is busy, 服务又不能停止的。 可以用"umount -fl"解决! 挂载nfs的共享目录: root@rabbit-0:~# mount -t nfs 192.168.207.129:/home/tomcat/img /home/tomcat/img -...
1 启动NFS时提示消息如下：# service nfs startStarting NFS services: [ OK ]Starting NFS quotas: [ OK ]Starting NFS mountd: rpc.mountd: svc_tli_create: could not open connection for udp6rpc.mountd: svc_tli_create: could not open connection for tcp6rpc.mountd: svc_tli_create: coul...