8.下面几种是在加载库,卸载库前后要执行commande的情况。 pre-install module command Executecommandbefore installing the specified module. See the belowdirective as well. install module command Executecommandinstead of the default insmod when installing the specified module. post-install module command Exec...
-rw-r--r--. chain.mod <==进行 loader 控制权移交的相关模块 -rw-r--r--. command.lst <==一些指令相关性的列表 -rw-r--r--. efiemu32.o <==下面几个则是与 uefi BIOS 相关的模块 -rw-r--r--. efiemu64.o -rw-r--r--. efiemu.mod -rw-r--r--. ext2.mod <==EXT 文件系统...
modprobe module_name parameter=value 这个命令接收多个parameter=value,由空格隔开。 通常,你需要在系统启动的时候加载模块。你可以通过在文件夹/etc/modules-load.d目录下的文件中指定模块以及相应的参数。 文件必须以.conf结尾,并且可以使用任何名字: 代码语言:javascript 代码运行次数:0 运行 AI代码解释 /etc/module...
>ops->open_device(device) -> vfio_pci_open_device vfio_pci_core_enable pci_enable_device pci_try_reset_function pci_read_config_word(pdev, PCI_COMMAND, &cmd) vfio_pci_zdev_open_device -> vfio-pci/zdev:添加打开/关闭设备挂钩,在vfio-pci open_device期间,传递与vfio组关联的KVM(如果存在)...
所有参数同sys_init_module函数中的完全一样,实际上在sys_init_module函数的一开始便会调用该函数,调用时传入的实参完全来自于sys_init_module函数,没有经过任何的处理或者修改。为了更清楚地解释模块加载时的内核行为,我们把sys_init_module分为两个部分:第一部分是调用load_module,完成模块加载最核心的任务;第二...
在我顿悟后,进入 bios,果然发现快速启动下的sata support设置成仅最后一次加载的 SATA 设备。改成所有 sata 设备后,Grub2 正常引导 Windows Boot Manager。 这个问题跟哪个系统没关系,只是因为我的 Windows 装在 sata 接口的固态里。而 Rocky 装在 NVMe 的固态里。
1.2.3 从文件加载模块finish_module SYSCALL_DEFINE3(finit_module,int,fd,constchar__user*,uargs,int,flags){structload_infoinfo={};loff_tsize;void*hdr;interr;err=may_init_module();if(err)returnerr;pr_debug("finit_module: fd=%d, uargs=%p, flags=%i\n",fd,uargs,flags);if(flags&~(MO...
1. init_module: 将一个新模块插入到内核中,用户空间工具只需要提供二进制数据,所有其他工作(特别是重定位和解决引用)由内核自身完成 2.delete_module: 从内核移除一个模块(前提是该模块的代码不再使用,并且其他模块也不再使用该模块导出的函数,否则强行卸载会造成内核地址引用错误PANIC) ...
如何使用DevEco Studio上的Git工具进行多远程仓管理 如何通过离线方式安装npm包 工程中存在多处-Wunused-command-line-argument告警,影响查看有效日志 如何设置可以在工程目录中自动定位当前打开的文件 打开工程时左侧目录树不显示 ExternalCpp视图中显示SDK的系统API ...
To view link status, run the ip link show command. Configure Layer 2 Ports Cumulus Linux does not put all ports into a bridge by default. To create a bridge and configure one or more front panel ports as members of the bridge: NVUE Commands The following configuration example places the ...