Linux kernel platform driver for ASUSTOR NAS hardware (leds, buttons). On many systems, ASUSTOR uses a mix of IT87 and CPU GPIOs to control leds and buttons. Adding support for more systems should be fairly tri
Linux 中大部分的设备驱动,都可以使用这套机制 , 设备用 Platform_device 表示,驱动用 Platform_driver 进行注册。 Linux platform driver 机制和传统的 device driver 机制 ( 通过 driver_register 函数进行注册 ) 相比,一个十分明显的优势在于 platform 机制将设备本身的资源注册进内核,由内核统一管理,在驱动程序中...
通过Platform机制开发发底层驱动的大致流程为: 定义 platform_device à 注册 platform_device à定义 platform_driver à注册 platform_driver。 首先要确认的就是设备的资源信息,例如设备的地址,中断号等。 在2.6内核中platform设备用结构体platform_device来描述,该结构体定义在kernel/include/linux/platform_device.h中...
定义platform_device --> 注册platform_device --> 定义platform_driver --> 注册platform_driver 。 1、platform_device注册过程: 首先要确认的就是设备的资源信息,例如设备的地址,中断号等。在 2.6 内核中platform 设备用结构体 platform_device 来描述,该结构体定义在 kernel\include\linux\platform_device.h 中...
MODULE_DESCRIPTION(DRIVER_DESC); 对于driver部分,需要定义Probe,remove接口,probe中通过misc_register来注册设备,miscdevice核心层会自动找一个空闲的次设备号。 #include <linux/init.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/platform_device.h> ...
在linux kernel中通过module_platform_driver来实现模块化平台驱动。大量的设备驱动程序都基于该种方式来实现,使用频次非常的高,在linux kernel 5.4.124的代码中搜索module_platform_driver共有2356次引用。 这个宏的使用方式大相径庭,有一套成熟的代码书写方式,将驱动程序入口符号作为宏的参数,基本格式如下: ...
二.Platform初始化 系统启动时初始化时创建了platform_bus总线设备和platform_bus_type总线,platform总线是在内核初始化的时候就注册进了内核。 内核初始化函数kernel_init()中调用了do_basic_setup() ,该函数中调用driver_init(),该函数中调用platform_bus_init(),我们看看platform_bus_init()函数: ...
drv-》driver.resume = platform_drv_resume; return driver_register(&drv-》driver); } 下面举个例子来说明一下: 在kernel/arch/arm/mach-pxa/pxa27x.c定义了 tatic struct resource pxa27x_ohci_resources[] = { [0] = { .start = 0x4C000000, ...
#include<linux/module.h>#include<linux/kernel.h>#include<linux/platform_device.h>static inttest_platform_probe(struct platform_device*pdev){printk("Driver probe\r\n");return0;}static inttest_platform_remove(struct platform_device*pdev){printk("Driver remove\r\n");return0;}static struct platf...
KERNELDIR := /home/toto/workspace/linux/linux-5.19CURRENT_PATH := $(shell pwd)obj-m := dtsplatform_driver.obuild: kernel_moduleskernel_modules:$(MAKE) -C $(KERNELDIR) M=$(CURRENT_PATH) modulesclean:$(MAKE) -C $(KERNELDIR) M=$(CURRENT_PATH) clean ...