http://blog.csdn.net/skyflying2012/article/details/7970341printk首先将输出内容添加到一个kernel缓冲区中,叫log_buf,log_buf相关代码如下:#defineMAX_CMDLINECONSOLES 8staticstructconsole_cmdline console_cmdline[MAX_CMDLINECONSOLES];staticintselected_console = -1;staticintpreferred_console = -1;intconsole_s...
start_kernel中parse_args遍历.init.setup段全部obs_kernel_param。 kernel/printk.c中注冊了‘console=’的解析函数console_setup(注冊了obs_kernel_param),所以匹配成功,会调用console_setup来解析。例如以下: static int __init console_setup(char *str) { char buf[sizeof(console_cmdline[0].name) + 4];...
首先看kernel启动时如何获取和处理指定的console参数。 kernel的启动参数cmdline可以指定调试console,如指定‘console=ttyS0,115200’, 根据之前的分析,cmdline中有console=xxx,start_kernel中parse_args遍历.init.setup段所有obs_kernel_param。 kernel/printk.c中注册了‘console=’的解析函数console_setup(注册了obs_kern...
Kernel版本号:3.4.55依照我的思路(还是时间顺序)分了4部分,指定kernel调试console,kernel下printk console的选择,kernel下console的注册,user空间console的选择。 一指定kernel调试console首先看kernel启动时如何获取和处理指定的console参数。kernel的启动参数cmdline可以指定调试console,如指定‘console=ttyS0,115200’,kernel...
Kernel启动时会解析cmdline,然后根据这些参数如console root来进行配置运行。 Cmdline是由bootloader传给kernel,如uboot,将需要传给kernel的参数做成一个tags链表放在ram中,将首地址传给kernel,kernel解析tags来获取cmdline等信息。 Uboot传参给kernel以及kernel如何解析tags可以看我的另一篇博文,链接如下: 今天要分析的是...
CONFIG_PREEMPT=yCONFIG_DEBUG_KERNEL=yCONFIG_KLLSYMS=yCONFIG_SPINLOCK_SLEEP=y 引发bug并打印信息 BUG()和BUG_ON() 一些内核调用可以用来方便标记bug,提供断言并输出信息。最常用的两个是BUG()和BUG_ON()。定义在中: #ifndefHAVE_ARCH_BUG#defineBUG()do{printk("BUG:failure at%s:%d/%s()!",__FILE_...
- /dev/ttyn:控制台终端(Console),当你在控制台上登录时,一般使用的是tty1 2.流程: 利用bpftrace我们追踪一下echo "xxxxx" /dev/ttyS12的内核栈 _raw_spin_unlock_irqrestore+17 uart_write+434 n_tty_write+954 tty_write+400 vfs_write+165 ksys_write+89 do_syscall_64+89 entry_SYSCALL_64_after...
CONFIG_DEBUG_KERNEL = y CONFIG_KLLSYMS = y CONFIG_SPINLOCK_SLEEP = y 引发bug并打印信息 BUG()和BUG_ON() 一些内核调用可以用来方便标记bug,提供断言并输出信息。最常用的两个是BUG()和BUG_ON()。定义在中: #ifndef HAVE_ARCH_BUG #define BUG() do { ...
console *,int*);void (*unblank)(void);int (*setup)(struct console *, char *);int (*early_setup)(void);short flags;short index; /*用来指定该console使用哪一个uart port (对应的uart_port中的line),如果为-1,kernel会自动选择第一个uart port*/int cflag;void *data;struct console *next;...
1. 无法访问console 原因:可能是串口设备未正确配置或驱动未安装。 解决方法: 检查串口设备是否可用,如/dev/ttyS0。 确保串口驱动已安装,如sudo apt-get install serial。 2. 启动信息未输出到console 原因:可能是内核参数未正确配置。 解决方法: 检查/etc/default/grub文件中的内核参数配置。